| Item | Specification |
|---|---|
| Manufacturer / Model | IMV VM-3024H SmartVibro |
| Type | Vibration Meter with FFT Analysis |
| Detection Method | Electrodynamic Velocity Pickup |
| Measurement Channels | 1 channel |
| Measurement Parameters | Acceleration, velocity, and displacement measured simultaneously |
| Frequency Range | 10 Hz to 1 kHz (acceleration, velocity, and displacement) |
| Acceleration Range | 0.3 / 1 / 3 / 10 / 30 / 100 m/s² |
| Maximum Acceleration | 100 m/s² (RMS / EQP / Peak) |
| Velocity Range | 0.6 / 2 / 6 / 20 / 60 / 200 mm/s |
| Maximum Velocity | 200 mm/s (RMS / EQP / Peak) |
| Displacement Range | 3 / 10 / 30 / 100 / 300 / 1,000 μm p-p |
| Maximum Displacement | 1,000 μm p-p (EQP / Peak) |
| Display Modes | Peak, RMS, EQP |
| FFT Analysis | Yes |
| Waveform Storage | Supported (SD/MMC-compatible card) |
| Outputs | AC OUT: 0 to ±1 V; DC OUT: 0 to +1 V (load impedance 10 kΩ or higher) |
| Sensitivity Error | ±5% at 80 Hz, relative to full-scale value |
| Range Switching Error | ±2% at 80 Hz |
| Indication Linearity | ±0.5% at 80 Hz |
| Power Supply | 2 × AA batteries |
| Continuous Operating Time | Approx. 20 hours or more |
| Dimensions | Approx. 74 W × 32.5 D × 148 H mm |
| Weight | Approx. 230 g, including batteries |
All of our products are 100% authentic.
We will carefully pack the item to ensure it arrives safely without damage.