Oxygen Automation · swing gate operator
Hercules 230V
Linear operator for swing gates up to 5m and 600kg per leaf. Supplied as a single arm kit for one leaf or a double arm kit for a pair.
600 kg
maximum leaf weight
5 m
maximum leaf width
3000 N
thrust force
IP54
ingress protection

A 500mm ram in a steel and aluminium housing, rated for continuous outdoor use from −40°C. Limit switches are fitted in the motor at the factory, which removes the separate switch kit and shortens commissioning. Manual key release is provided for hand operation during a power failure.

UK stock and lead time

Hercules is held in our Essex warehouse. Dispatch is 2 to 10 working days, depending on whether the option you select is on the shelf or is being brought in from the manufacturer against your order.

Stock positions change daily. Contact us through eBay messages before ordering and we will confirm exactly what is available today.

Configuration: number of motors
Single arm
One motor, for a gate with a single leaf. Control board and accessories are identical to the double arm specification.
Double arm
Two motors, one left hand and one right hand, for a pair of leaves meeting at the centre. The standard specification for a driveway entrance.
Configuration: kit level

Each kit level contains the level below it in full. All levels include mounting brackets, release key, fixings and an English installation manual, and are supplied with one motor for a single arm or two for a double arm.

Kit levelAdditional to the level belowTypical application
Motor only
Hercules motor only, 1 or 2 as selected. No control equipment supplied.Replacement ram, upgrade to an existing compatible 230V installation, or the addition of a second arm. Hercules requires the Erato 230V control unit to operate.
Mini kit
Erato 230V control unit and enclosure
1 × rolling code remote handset
The minimum specification that will drive a gate. Photocells must be added separately before the installation is commissioned.
Full kit
4 × additional remote handsets, 5 in total
1 × pair of 180° photocells
1 × Smarty Bluetooth receiver
The standard specification for most domestic driveways. Includes the baseline safety device and phone control.
Maxi kit
1 × additional pair of photocells, 2 in total
1 × horizontal electric lock
1 × steel wired keypad
Beams on both sides of the entrance, code entry for visitors, and the electric lock recommended for leaves at the top of the size range.
Technical specification
Supply voltage230 V AC
Motor power150 W
Current draw1.2 A
Thrust force3000 N
Stroke500 mm
Maximum leaf5 m and 600 kg per leaf
Opening time29 s
Maximum opening angle110°
Limit switchesFitted in the motor
Operating temperature−40°C to +55°C
Ingress protectionIP54
Motor weight11 kg
Required control unitErato 230V
Where Hercules sits in the range
Capacity
The highest rated swing operator in the Oxygen Automation range. Sargon is rated to 350kg per leaf; Hercules carries 600kg.
Thrust
3000 N is sufficient for heavy wrought iron, hardwood and fully sheeted leaves without the motor labouring.
Environmental rating
IP54 and a −40°C lower limit place it above the rest of the swing range for exposed, coastal and cold sites.
Commissioning
Factory-fitted limit switches remove a separate switch kit and reduce set-up time on site.
Construction
Steel and aluminium housing at 11kg per motor, with manual key release for operation during a power failure.
Alternatives
Below 3m and 250kg per leaf, Adonis 24V or Sargon will meet the duty at lower cost. We can advise on either.
Site checks before ordering
1Each leaf is no wider than 5m and no heavier than 600kg.
2The gate swings inwards, and the hinges are sound, level and free running. A leaf of this weight will find any wear in the hinges.
3Each driven pillar has clearance for the rear bracket and the full 500mm of ram travel behind the gate line.
4A 230V mains supply can be brought to the control enclosure, with ducting to the second motor and the photocell positions.
5Wind loading has been considered. A solid leaf at 5m should be specified with an electric lock, and a ground stop where practicable.

If you are unsure, send us the leaf width, leaf weight, gate infill and pillar depth through eBay messages and we will confirm whether Hercules is the correct specification.

Installation and compliance

Hercules operates on a 230V mains supply and drives the heaviest gates in the range. Installation must be carried out by a competent person and wired in accordance with BS 7671. Powered gates in the UK fall within the scope of the Supply of Machinery (Safety) Regulations, and responsibility for force testing and risk assessment on the completed installation rests with the installer.

Photocells are the minimum safety device on any powered gate and are not optional on a leaf of this size. Where a kit level without photocells is selected, a pair must be added. A gate of this mass should also be fitted with safety edges to the leading and closing edges. Both are available from us; see our other items.

Compatible accessories

Genuine Oxygen Automation parts, held in our UK warehouse. See our other items.

ItemReferenceFunction
Erato 230V control unitGAT9.1005Required control unit, with adjustable obstacle detection
Moses remote controlGAT9.9006433MHz rolling code handset, additional units
Photocells, 180°GAT9.9011Infrared beam pair, baseline safety device
Flashing lightGAT9.9041Movement warning indicator
Smarty Bluetooth receiverGAT9.9104Operation from a mobile phone application
Wired keypadGAT9.9055Code entry, 12V DC, three wire
Key selectorGAT9.9031Two-position key switch override
Push buttonGAT9.9094Exit control inside the boundary
Electric lock, horizontalGAT9.9092Retains solid or wind-loaded leaves between cycles
Dispatch, warranty and returns
Dispatch2 to 10 working days from our Essex warehouse, depending on stock. Items not on the shelf are shipped from the manufacturer against your order
DeliveryTracked courier, UK mainland. At 11kg per motor, a double arm kit may require a pallet or two-man service to some postcodes. Please confirm with us before ordering
Warranty2 year manufacturer warranty, administered by us in the UK. No returns to Italy are required
Returns30 days. Goods must be unused and complete in their original packaging
VATUK VAT registered. A full VAT invoice is issued with every order
Wider Oxygen Automation range

Hercules is one operator within the 2026 range. All models below are available through us in the UK. See our other items, or contact us for anything not currently listed.

Swing gates
Sargon S, M and L — 230V or 24V, 3m to 5m leaves, 350kg, 3300N
Poseidon M 230V — 400mm ram, 4m and 250kg, inverted mounting for low pillars
Adonis 24V — 300mm ram, 3m and 250kg, 15s, IP44
Sliding gates
Perseus FAST 24V — 500kg at 20 m/min, soft start and stop
Perseus 230V — 600kg, 10.2 m/min
Perseus EVO 230V — 800kg, 480W
NYX 230V — 1000kg, IP55
Orion 24V — 2000kg at 16 m/min, magnetic limit switch
Garage and sectional doors
Anubis 800N — up to 12m² or 150kg, 12cm/s
Anubis 1200N — up to 18m² or 230kg
EOS 200 EB — central shaft motor
EOS 200 DM EB and 240 DM EB — central motors with manual override
Control units
Erato 230V — swing gates, adjustable obstacle detection
Erato 24V — swing gates, low voltage
Theia 230V — sliding gates, safety edge input NC and 8K2
Theia 24V — sliding gates, low voltage
Urania 230V — rolling shutters and garage doors
Rolling shutters and awnings
Elettra S — 230V tubular motor, integral radio receiver and electronic limit switch, 9Nm to 120Nm
Merope S — tubular motor for rolling shutters
Elettra M and Merope M — tubular motors for awnings
Brackets, adaptors, caps, octagonal tube, joints and handles to suit
Windows and roof lights
Teti — chain actuator, 180mm or 300mm stroke, 23mm/sec
Zephyr 230V and 24V — rod actuator with adjustable stroke
Medea Evo — actuator for top and bottom hinged windows
Ceres Slim 230V — integral control unit with 433.92MHz receiver
Minerva 1 and Minerva 16 — wall transmitters, 1 or 16 channel
Smart control
Athena 1 — single channel wall transmitter
Athena 5 — 4+1 channel wall transmitter
Oxygen Smarty — Bluetooth receiver with phone application
Gate hardware
Nylon rack — M4 module, steel core, bolt fixing, up to 1000kg
Steel rack — M4 module, welded fixing, up to 2000kg
Photocell columns, electric locks, safety edges and keypads

Models listed are taken from the Oxygen Automation 2026 general catalogue. Specifications are provided as a guide; contact us for the full data sheet on any model before ordering.

Manufactured in Italy. Stocked, invoiced and supported in the UK.
Genuine stock held in our Essex warehouse, supplied by a team that installs this equipment. For questions on sizing, wiring or the control unit, contact us through eBay messages.

>

Powered by WonderLister App
Powered by WonderLister App