Battery holder and storage dispenser for CR coin cells or LR / SR / AG type button batteries
Holds 5 or 10 batteries of a specific type, with a hidden magnets embedded in both the carrier and the cover. The holders close with a satisfying snap and batteries are kept from touching by a dividers in the carrier. Printed with the most common battery identification codes for the battery on the case.
The covers have a tab to make sure the holder is always positioned with the battery access facing upwards. As long as the lettering is facing you the batteries will not fall out, unless you want to dispense on at a time, then simply turn the holder over and gently pull until one drops out. The LR44 Double Row holder has the battery slots staggered so it is still possible to dispense one at a time.
Holder Dimensions (approx)
CR2032
Holds x5 = 30 x 30 x 40mm
Holds x10 = 30 x 30 x 60mm
CR2025
Holds x5 = 30 x 30 x 36mm
Holds x10 = 30 x 30 x 54mm
CR2016
Holds x5 = 30 x 30 x 32mm
Holds x10 = 30 x 30 x 45mm
LR44 / SR44 / AG13
Holds x5 = 20 x 20 x 50mm
Holds x10 = 20 x 20 x 84mm
Holds x10 - Double Row
= 18 x 20 x 54mm
LR54 / SR54 / AG10
Holds x5 = 20 x 20 x 39mm
Holds x10 = 20 x 20 x 60mm
LR66 / SR66 / AG4
Holds x5 = 16 x 16 x 36mm
Holds x10 = 16 x 16 x 55mm
LR41 / SR41 / AG3
Holds x5 = 16 x 16 x 42mm
Holds x10 = 16 x 16 x 65mm
3D printed in PLA - If you would like a battery holder for a different size of battery, please request via message as I may add it to the existing range.
Currently available in Red, Green, Blue, Purple, Yellow, Black, Orange, Magenta, Pink and Sky Blue.
Could be printed in other colours, please request via message.
*Batteries not included *
Colours in images may vary slightly to actual product, while all care has been taken to represent the colour as accurately as possible, differences may occur due to viewing conditions, screen colour and availability of materials.