• Compatibility :
  •  
  • 2004 Dodge Dakota 3.7L 2001-2003 Dodge Dakota 3.9L 2001 2003 Dodge Dakota 4.7L 2001-2003 Dodge Dakota 5.9L 2004 Dodge Durango 3.7L 2001-2003 Dodge Durango 4.7L 2004 Dodge Durango 5.7L 2001-2003 Dodge Durango 5.9L 2004 Dodge Ram 1500 3.7L 2002 Dodge Ram 1500 4.7L 2004-2006 Dodge Ram 1500 8.3L 2001-2002 Dodge Ram 1500 Van 5.9L 2003 Dodge Ram 2500 5.7L 2001-2002 Dodge Ram 2500 Van 5.9L 2001-2002 Dodge Ram 3500 Van 5.9L 2004 Jeep Liberty 3.7L 2004 Jeep Wrangler 4.0L
  •  
  • Features:
  •  

    • Oxygen 02 O2 Sensor Downstream for Dodge Dakota Ram 1500 2500 3500 2001-2006

    Compatibility :

     

    2004 Dodge Dakota 3.7L
    2001-2003 Dodge Dakota 3.9L
    2001 2003 Dodge Dakota 4.7L
    2001-2003 Dodge Dakota 5.9L
    2004 Dodge Durango 3.7L
    2001-2003 Dodge Durango 4.7L
    2004 Dodge Durango 5.7L
    2001-2003 Dodge Durango 5.9L
    2004 Dodge Ram 1500 3.7L
    2002 Dodge Ram 1500 4.7L
    2004-2006 Dodge Ram 1500 8.3L
    2001-2002 Dodge Ram 1500 Van 5.9L
    2003 Dodge Ram 2500 5.7L
    2001-2002 Dodge Ram 2500 Van 5.9L
    2001-2002 Dodge Ram 3500 Van 5.9L
    2004 Jeep Liberty 3.7L
    2004 Jeep Wrangler 4.0L

     

    Features:

     

    • Porous PTFE Filter - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing.
    • Double Protection Cover - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
    • Stainless Steel Housing - Resists corrosion and contamination with a rugged, watertight body.
    • Aluminum-Oxide Trap Layer - Keeps silicone and lead outside the ceramic elient through, preventing damage to the platinum electrode.

     

    Where is the oxygen sensor in your vehiche?

     

     

    Whow to install an oxygen sensor?

     

    1.Locate the oxygen sensor on your vehicle by looking for a part that looks like a spark plug that sticks out from the exhaust pipe. It will have an electrical connection attached to it.

    2.Disconnect the electrical connection on the oxygen sensor. Use a flat tip screwdriver to push in the tabs and pull the connection apart.

    3.Unscrew the oxygen sensor off the exhaust pipe using either an open-end wrench or a special socket made to remove it. The majority of oxygen sensors will take an SAE 7⁄8 inch (2.2 cm) wrench.

    4.Compare your new oxygen sensor to the old one. If the new one did not come with an electrical connection, but just with the wires stubbed out, you need to do a little work.

    · Cut off the old connector from the bad oxygen sensor, strip the wires and solder the wires to the new oxygen sensor. You can also use butt connectors.

    · Use heat sensitive shrink tape to seal the connections.

    · Follow manufacturer's instructions to know which wires to tie together.

    5.Reverse the steps used in removing the oxygen sensor and install the new part.Add a small amount of anti-seize to the threads of the new sensor. Screw it in place clockwise and snug it down with the socket or open-end wrench. Do not over tighten the sensor as you might strip the threads.

    6.Plug the electrical connections back in.

    7.Turn on the ignition key, but do not start your vehicle. Use the diagnostic scanner/reader to clear the code from the vehicle's computer.

     

    8.Start the car. You should notice an immediate improvement.

     

    NOTE:

     

    If you can't  determine whether the oxygen sensor fit your vehicle or not, please contact us.

     

     

     

     

     

     


    Item Specifics
    Brand classic-autoparts
    Manufacturer Part Number CL115931DTS
    Manufacturer Warranty 1 Year
    Fitment Type Direct Replacement
    Custom Bundle No
    Modified Item No
    Type Oxygen Sensor
    Number of Pieces 1
    Wire 4
    Placement on Vehicle Downstream
    Custom Bundle No
    Housing Material Metal
    Thread Size 18 X 1.5 MM
    Universal Or Specific Fit Specific
    Automotive Color / Finish Steel
    Terminal Type Blade
    Attachment Method Screw-On
    Sensor Type Heated
    Type Sensor
    Features Direct Fit

    Payment
    1. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    2.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
    Shipping
    1.All the orders are shipped from USA warehouse.
     
    2.Orders processed within 24 hours of payment verification.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    Contact Us

    If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

    Feedback

      We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    Store Category
     Store Home
     Horns
     Dipstick
     Removal-Unlock tool
     Lift Support
     Air suspensions
     snorkel air intake
     complete struts
     Cylinder Piston Kit
     Strut Mount
     coilover
     Shocks & Struts
     Air Ride Suspension Valve
     Motorcycle Exhaust Pipe
     Power Brake Booster
     Bumper
     Engine Splash Shield
     Strut+Suspension+Bearing
     Brake caliper
     Brake system
     Fuel System
     Car accessories
     Lawn Mower Clutch
     AC A/C Compressor
     Car Sun Visor
     Golf Cart Seat Covers
     Power Pressure Washer Pump
     Lawn Mower Spindle
     RV Heated Water Hose
     Lawn Mower Power Cable
     Lawn Mower Deck Rebuild Kit
    Hot Item
    Fast and Free

    content_src_url

    Best seller

    content_src_url
    Oxygen 02 O2 Sensor Downstream for Dodge Dakota Ram 1500 2500 3500 2001-2006

    Compatibility :

     

    2004 Dodge Dakota 3.7L
    2001-2003 Dodge Dakota 3.9L
    2001 2003 Dodge Dakota 4.7L
    2001-2003 Dodge Dakota 5.9L
    2004 Dodge Durango 3.7L
    2001-2003 Dodge Durango 4.7L
    2004 Dodge Durango 5.7L
    2001-2003 Dodge Durango 5.9L
    2004 Dodge Ram 1500 3.7L
    2002 Dodge Ram 1500 4.7L
    2004-2006 Dodge Ram 1500 8.3L
    2001-2002 Dodge Ram 1500 Van 5.9L
    2003 Dodge Ram 2500 5.7L
    2001-2002 Dodge Ram 2500 Van 5.9L
    2001-2002 Dodge Ram 3500 Van 5.9L
    2004 Jeep Liberty 3.7L
    2004 Jeep Wrangler 4.0L

     

    Features:

     

    • Porous PTFE Filter - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing.
    • Double Protection Cover - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
    • Stainless Steel Housing - Resists corrosion and contamination with a rugged, watertight body.
    • Aluminum-Oxide Trap Layer - Keeps silicone and lead outside the ceramic elient through, preventing damage to the platinum electrode.

     

    Where is the oxygen sensor in your vehiche?

     

     

    Whow to install an oxygen sensor?

     

    1.Locate the oxygen sensor on your vehicle by looking for a part that looks like a spark plug that sticks out from the exhaust pipe. It will have an electrical connection attached to it.

    2.Disconnect the electrical connection on the oxygen sensor. Use a flat tip screwdriver to push in the tabs and pull the connection apart.

    3.Unscrew the oxygen sensor off the exhaust pipe using either an open-end wrench or a special socket made to remove it. The majority of oxygen sensors will take an SAE 7⁄8 inch (2.2 cm) wrench.

    4.Compare your new oxygen sensor to the old one. If the new one did not come with an electrical connection, but just with the wires stubbed out, you need to do a little work.

    · Cut off the old connector from the bad oxygen sensor, strip the wires and solder the wires to the new oxygen sensor. You can also use butt connectors.

    · Use heat sensitive shrink tape to seal the connections.

    · Follow manufacturer's instructions to know which wires to tie together.

    5.Reverse the steps used in removing the oxygen sensor and install the new part.Add a small amount of anti-seize to the threads of the new sensor. Screw it in place clockwise and snug it down with the socket or open-end wrench. Do not over tighten the sensor as you might strip the threads.

    6.Plug the electrical connections back in.

    7.Turn on the ignition key, but do not start your vehicle. Use the diagnostic scanner/reader to clear the code from the vehicle's computer.

     

    8.Start the car. You should notice an immediate improvement.

     

    NOTE:

     

    If you can't  determine whether the oxygen sensor fit your vehicle or not, please contact us.

     

     

     

     

     

     



    1. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    2.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
    1.All the orders are shipped from USA warehouse.
     
    2.Orders processed within 24 hours of payment verification.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

      We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.


    All rights reserved.