Vehicle Fitment

• 1997–2001 Subaru Impreza 2.5 RS (FWD/AWD, 2.5L H4)
• 2013–2020 Subaru BRZ (Base, Limited, Series.Blue, Series.Yellow, tS, RWD)
• 2022 Subaru BRZ (Base, Limited, Premium, RWD)
• 2013–2016 Scion FR-S (Base, RWD)
• 2017–2020 Toyota 86 (Base, GT, TRD Special Edition, RWD)

Fitment Notes

• Bolt pattern is 5x100 — single drill only. Confirm your vehicle uses the 5x100 bolt pattern before ordering.
• Hub bore is 72.6mm — hub-centric rings may be required depending on your vehicle's factory hub bore diameter. Verify before installation; rings are not included.
• Offset is +45mm (backspacing: 6.27 in). At 18x8 and +45mm, this configuration provides a clean OEM-geometry fitment on the BRZ, FR-S, and 86 that fills the wheel well at stock ride height without fender modification. Verify clearance with your specific suspension setup and tire sizing before installing.
• The 2023–2025 Subaru BRZ and 2022–2025 Toyota GR86 are not confirmed for this SKU — buyers with those model years should verify independently before purchasing.
• Gold is a limited finish for the TS-10 — availability may vary and this SKU may not always be in stock. Confirm availability with your retailer before ordering.
• This wheel is also available in Gloss Black (499-880-8045BK) and Storm Gray (499-880-8045GR) in the same 18x8 / 5x100 / +45mm configuration.
• The TS-10 includes Enkei's signature flat center cap as standard — distinct from the dome-style center caps used on other Enkei models.
• This wheel is sold individually; a set of four (4) is required for complete vehicle fitment.
• A flat center cap is included with purchase. Valve stems are not included and must be sourced separately.

Features

• The TS-10's design takes the absolute minimum approach to wheel aesthetics: ten cleanly cut spokes with no splits, angles, or surface treatment reach all the way to the very outer edge of the wheel, creating the visual impression that the wheel is larger than its actual diameter through spoke reach alone rather than through spoke complexity.
• The center of the wheel features a concave area that creates a dip near the bolt pattern, adding dimensional depth to the otherwise flat face — completed by the flush, flat center cap that sits at the lowest point of this concavity for a finished, intentional appearance.
• A subtle step-down edge at the outer rim creates a visual lip around the perimeter of the wheel face, and each spoke extends past this step to sit atop the outer edge — a detail that adds depth perception and visual pop to the TS-10's otherwise minimal design without introducing complexity.
• Built using Enkei's MAT (Most Advanced Technology) flow-forming process, combining a cast aluminum center with a rim-spinning operation that pressure-densifies the barrel section, producing a wheel that is significantly lighter than conventional casting of equivalent dimensions at equal or greater structural strength.
• Confirmed actual weight of 19.1 lbs per wheel at 18x8 — a competitive and notably light figure for an 18-inch wheel in this width, and one that translates directly into reduced unsprung mass and improved steering response on the weight-sensitive BRZ, FR-S, and 86 platforms.
• Gold finish is a limited color option for the TS-10, available in select sizes — a warm metallic gold that contrasts sharply with darker body colors and pairs distinctively with the Hyper Blue, Crystal Black Silica, and Iced Blue Metallic common to the BRZ and 86 color palette.
• Enkei's signature flat center cap is standard equipment on every TS-10 — a low-profile, flush-fitting cap that maintains the minimalist visual discipline of the 10-spoke design.
• Engineered and tested to Enkei's proprietary Spec-E standard, which exceeds JWL requirements by demanding a higher drop point in the impact test and 20% more cycles in both rotary bending fatigue and dynamic radial fatigue testing.
• Backed by Enkei's Lifetime Structural Warranty and 1-Year Finish Warranty through authorized dealers.

Specifications

• Part Number: 499-880-8045GG
• Wheel Model: TS-10
• Series: Tuning Series
• Wheel Diameter: 18 inches
• Wheel Width: 8 inches
• Bolt Pattern: 5x100
• Offset: +45mm
• Backspacing: 6.27 inches
• Hub Bore: 72.6mm
• Load Rating: 1,540 lbs per wheel
• Weight: 19.1 lbs per wheel (actual)
• Finish: Gold (limited finish)
• Wheel Structure: One Piece
• Construction: MAT Flow-Forming (Rotary Forged)
• Testing Standard: Enkei Spec-E (exceeds JWL)
• Spoke Count: 10
• Spoke Style: Clean 10-spoke, edge-to-edge, concave center with step-down outer lip
• Center Cap Style: Flat (Enkei signature flat cap)
• Lug Style: Exposed

Included Components

• 1x Enkei TS-10 18x8 Gold Wheel (499-880-8045GG)
• 1x Flat center cap (Enkei signature TS-10 flat-style cap)
• Note: Lug nuts, hub-centric rings, and valve stems are not included and must be sourced separately.

Product Description

The Enkei TS-10 (499-880-8045GG) is an 18x8 Tuning Series wheel in the limited Gold finish, drilled for the 5x100 bolt pattern at +45mm offset. Confirmed by OAKOS across the 2013–2020 BRZ, 2022 BRZ, 2013–2016 FR-S, 2017–2020 86, and the 1997–2001 Impreza 2.5 RS, the TS-10 in this configuration is one of the most directly targeted 18-inch aftermarket options for the 5x100 sport compact platform. The +45mm offset and 8-inch width produce a clean, OEM-geometry fitment at stock ride height that fills the wheel well naturally on the BRZ and 86 without requiring fender modification or suspension change.

The TS-10's design is Enkei's most minimal Tuning Series offering: ten cleanly cut spokes extend to the full outer rim edge with no splits, surface treatments, or decorative complexity — the depth and character of the design come entirely from the concave center dip, the subtle outer step-down lip, and the flat center cap that anchors the composition. At 19.1 lbs actual weight per OAKOS and 1010Tires, the TS-10 18x8 is notably light for an 18-inch wheel — a product of the MAT flow-forming process applying barrel-densification technology to what is already a spoke-efficient design. On the BRZ, FR-S, and 86, this weight reduction translates to meaningfully sharper steering response and more responsive acceleration and braking on a platform already known for its precise handling balance.

The Gold finish is a limited color for the TS-10 — availability varies and this SKU may not always be in regular stock. Confirm availability with your retailer before ordering. The 2023–2025 BRZ and 2022–2025 GR86 are not confirmed for this SKU — verify independently before purchasing for those model years. This wheel is sold individually; a set of four is required. A flat center cap is included — valve stems, lug nuts, and hub-centric rings must be sourced separately. For the Gloss Black version, see 499-880-8045BK. For Storm Gray, see 499-880-8045GR.