Vehicle Fitment

• 2024–2026 Toyota Tacoma (Double Cab, 5' Bed, SR, RWD/4WD, 2.4L Turbocharged I4 i-FORCE)
• 2024–2026 Toyota Tacoma (Double Cab, 5' Bed, SR5, RWD/4WD, 2.4L Turbocharged I4 i-FORCE)
• 2024–2026 Toyota Tacoma (Double Cab, 5' Bed, TRD Sport, RWD/4WD, 2.4L Turbocharged I4 i-FORCE / 2.4L Turbocharged Hybrid I4 i-FORCE MAX)
• 2024–2026 Toyota Tacoma (Double Cab, 5' Bed, TRD Off-Road, RWD/4WD, 2.4L Turbocharged I4 i-FORCE / 2.4L Turbocharged Hybrid I4 i-FORCE MAX)
• 2024–2026 Toyota Tacoma (Double Cab, 5' Bed, Limited, RWD/4WD, 2.4L Turbocharged I4 i-FORCE / 2.4L Turbocharged Hybrid I4 i-FORCE MAX)
• 2024–2026 Toyota Tacoma (Double Cab, 5' Bed, TRD Pro, 4WD, 2.4L Turbocharged Hybrid I4 i-FORCE MAX)
• 2024–2026 Toyota Tacoma (Double Cab, 5' Bed, Trailhunter, 4WD, 2.4L Turbocharged Hybrid I4 i-FORCE MAX)

Fitment Notes

• Fits Double Cab with 5' (60.3") bed only — does NOT fit XtraCab configurations or any 6' bed Tacoma models
• Does NOT fit TRD PreRunner (XtraCab only, 6' bed)
• If installing over an existing spray-in bedliner, supplemental installation kit #BRZSPRAYON is required (sold separately)
• Retains full access to all factory tie-down anchors and bed-mounted accessories after installation

Features

• 100% polypropylene construction delivers commercial-grade durability with a soft, carpet-like look and feel
• Knee-friendly 3/4" cushioned floor surface dramatically reduces fatigue during loading, unloading, and in-bed work
• Built-in tailgate mat with integrated hinge seals the gap between the bed floor and tailgate, blocking debris accumulation
• Slip- and skid-resistant fiber surface prevents cargo from shifting during transit on all terrain types
• Closed-cell polypropylene foam will not absorb water under any condition — permanently resistant to mold and mildew
• Withstands battery acid, gasoline, oil, bleach, and other harsh chemicals without staining, softening, or degrading
• UV- and fade-resistant material maintains color and surface integrity through years of direct sun exposure
• Die-cut to precisely match the 2024–2026 Tacoma Double Cab 5' bed floor, contouring around wheel wells with zero gaps
• Full-coverage liner protects the floor, both sidewalls, the bulkhead, and the tailgate in one complete kit
• Water drains through the zippered perimeter and exits through factory bed drain holes — dries in as little as 20 minutes
• Installs in approximately 30 minutes using included hook-and-loop fasteners — no drilling or bed modifications needed
• Made in the USA and backed by a limited lifetime warranty

Specifications

• Material: 100% Polypropylene (fiber face layer and closed-cell foam backing)
• Floor Thickness: 3/4 in.
• Sidewall Thickness: 1/4 in.
• Bed Length Fitment: 5 ft. (60.3 in.) Short Bed — Double Cab Only
• Coverage: Full Bed — Floor, Sidewalls, Bulkhead, and Tailgate
• Color: Charcoal Gray
• Installation Method: Hook-and-Loop Fastener (no drilling required)
• Drainage: Zippered perimeter; exits through factory bed drain holes
• Warranty: Limited Lifetime
• Country of Manufacture: USA
• UPC: 870558007833

Included Components

• 1x BedRug Classic Bed Liner — Floor Section
• 1x Built-In Tailgate Mat (integrated)
• 1x Bulkhead Panel
• 2x Sidewall Panels
• Hook-and-Loop Fasteners (installation hardware included)

Product Description

The BedRug BRY24DCK is a custom-molded, full-coverage classic bed liner engineered specifically for the 2024–2026 Toyota Tacoma in Double Cab configuration with the 5' short bed. Covering all seven available Double Cab trims — from the base SR through the off-road-focused TRD Pro and Trailhunter — this liner is compatible with both the i-FORCE 2.4L turbocharged gas engine and the i-FORCE MAX 2.4L turbocharged hybrid powertrain across RWD and 4WD drivetrain configurations. Die-cut to match the Tacoma's specific bed floor dimensions, the BRY24DCK wraps precisely around the wheel wells and bed contours, covering the floor, both sidewalls, the bulkhead, and the tailgate with a seamless, void-free surface. One of its most useful features is the built-in tailgate mat with an integrated hinge, which fills the gap between the bed floor and tailgate — a common debris trap that standard liners leave unprotected.

Unlike rubber mats or hard plastic drop-in liners, the BedRug's 100% polypropylene construction combines the look and feel of carpet with the performance of an industrial work surface. The 3/4" closed-cell foam floor is completely non-absorbent — water, oil, battery acid, gasoline, and bleach simply cannot penetrate it, eliminating any risk of mold, mildew, or floor corrosion beneath the liner. A slip-resistant fiber surface keeps cargo firmly in place during off-road runs, highway hauling, and everything in between. The BedRug material is also fully UV- and fade-resistant, so the liner maintains its appearance and structural integrity even after years of outdoor exposure. When it's time to clean up, a quick spray with a hose or a pass with a vacuum is all it takes — water drains through the zippered perimeter and out the factory drain holes in the Tacoma's bed, drying completely in as little as 20 minutes.

Installation requires no drilling, cutting, or permanent modifications to the truck bed. Using the included hook-and-loop fasteners and basic hand tools, the complete liner fits in approximately 30 minutes and can be removed just as easily for cleaning underneath. All factory tie-down anchors and bed accessories remain fully accessible once the liner is in place. Tacoma owners with an existing spray-in bedliner will need the supplemental adhesion kit #BRZSPRAYON (sold separately) for a proper bond. Proudly made in the USA and backed by BedRug's limited lifetime warranty, the BRY24DCK is the definitive bed protection solution for 2024–2026 Tacoma Double Cab owners who expect carpet-level comfort from a liner built to withstand real-world punishment.