Dorian 79440, VCGW-331-KEU-DKU10HT Carbide Inserts (10 PCS)

Dorian ToolVCGW-331-KEU-DKU10HT Carbide InsertsTechnical SpecsStyle: VCGWChipbreaker: KEUWorkpiece Material: Cast Iron, Aluminum, Hardened Steel, Non-FerrousCorner Radius: .015 inchesCutting Angle: 35 degreeCutting Direction: NeutralCut Type: UniversalDiameter: 3/8 inchesShape: 35-Degree DiamondThickness: 3/16 inchesRake Type: Negative Rake AngleMaterial: CarbideGrade: DKU10HTFinish / Coating: Uncoated FeaturesFirst Choice: For Universal Application of Cast Iron, Aluminum, with Medium Depth of Cut and Medium Feed per Revolution at High SFM (Vc), Brittle! Not for interrupted Cut, Wet/Dry Working Condition. KEU, Ground Surface, no Chip Breaker, Negative Rake Angle, and Honed Cutting Edge, For General Turning Application, of Cast Iron and Hardened Steel, at Medium Depth of Cut (ap) and Feed Rate per Revolution (fn). Grade DescriptionThe DKU10HT uncoated grade with a hard and high wear abrasive resistant substrate. High Cutting Speed, for Finishing Turning Application, and Medium to Roughing Application when Turning smooth surface. For cutting Cast Iron, Aluminum, Hardened Steel, and all non Ferrous Material. High SFM (Vc) Brittle! Not for interrupted Cut MPN: 79440PKG QTY: 10 PCS

Dorian 79440, VCGW-331-KEU-DKU10HT Carbide Inserts (10 PCS)


Dorian Tool
VCGW-331-KEU-DKU10HT Carbide Inserts


Technical Specs
Style: VCGW
Chipbreaker: KEU
Workpiece Material: Cast Iron, Aluminum, Hardened Steel, Non-Ferrous
Corner Radius: .015 inches
Cutting Angle: 35 degree
Cutting Direction: Neutral
Cut Type: Universal
Diameter: 3/8 inches
Shape: 35-Degree Diamond
Thickness: 3/16 inches
Rake Type: Negative Rake Angle
Material: Carbide
Grade: DKU10HT
Finish / Coating: Uncoated


Features
First Choice: For Universal Application of Cast Iron, Aluminum, with Medium Depth of Cut and Medium Feed per Revolution at High SFM (Vc), Brittle! Not for interrupted Cut, Wet/Dry Working Condition. KEU, Ground Surface, no Chip Breaker, Negative Rake Angle, and Honed Cutting Edge, For General Turning Application, of Cast Iron and Hardened Steel, at Medium Depth of Cut (ap) and Feed Rate per Revolution (fn).


Grade Description
The DKU10HT uncoated grade with a hard and high wear abrasive resistant substrate. High Cutting Speed, for Finishing Turning Application, and Medium to Roughing Application when Turning smooth surface. For cutting Cast Iron, Aluminum, Hardened Steel, and all non Ferrous Material. High SFM (Vc) Brittle! Not for interrupted Cut


MPN: 79440
PKG QTY: 10 PCS

×