The steam electric iron is a household and commercial clothing care electric appliance integrating the functions of heating, steam and ironing. It is equipped with a 2L high-capacity water tank for continuous steam output, well meeting different ironing requirements. The steam iron is suitable for clothing care scenarios, such as household daily ironing, clothing stores, hotels and dormitories.

Parameters:

Model: SPR/MN 2002
Voltage: 110V
Water capacity: 2L (0.5 US Gal)
Steam pressure: 2.5 bar
Min. steam output time: About 3 hours
Boiler resistance power: 1600W
Iron resistance power: 900W
Net weight: 9.1kg (20lbs)

Features:

1. The device comes with a steam boiler system made of stainless steel, the water tank is 2L, and the iron is attached to it. Pressurized steam that the resistance creates by boiling the water in the boiler exists; it moves by pressing the control button on the iron, allows perfect ironing from the heat-resistant silicone hose, then flows through the hot channels in the iron and is discharged from the holes of the iron base.
2. As long as the steam control knob is pressed, the water in the boiler is constantly steamed at the pressure of 2.5-3 bar.
3. 4-stage safety system.
4. The Boiler Resistance Power is 1600 Watt, and the Iron Resistance Power is 900 watts per unit. Provides constantly pressurized and dry steam, allowing you to iron quickly and therefore it consumes less energy.
5. The device works with 110V electric energy.

Details:

Iron Body
The iron body can be used to conduct efficient ironing. The steam knob can be easily adjusted to adapt to different fabrics and meet different ironing requirements. The ergonomic handle is resistant to heat and comfortable to hold, and can greatly relieve the fatigue during long-term operation.

Control Panel
The control panel is simple and compact in structure and can achieve independent control over the steam iron and boiler. Multiple indicator lamps can clearly indicate the state of the machine. The pressure gauge can precisely display the steam pressure in real time, ensuring the ironing effect is stable.

Safety Valve
The safety valve is reliable and durable, can bear the high-pressure steam for a long time, is not prone to aging and deformation and is easy to clean and maintain. The steam output can be kept stable, and the ironing quality can be well improved.

Iron Rest
The iron rest is resistant to high temperature, scratch and wear, assists the iron base plate in quick heat dissipation and prolongs the service life. The antiskid protrusions are designed for preventing the iron from sliding and improving the safety.

Operation Method:

1. Make sure the boiler is not connected to the power supply. Remove the water tank cover by turning it counterclockwise. Use the funnel and measuring glass in the box, and pour the enough tap water to reach the device capacity. You can adjust water volume by using the measuring glass.
2. The scaled water level tube available in your box should be placed vertically into the water inlet hole, with the scaled side of tube down and the water tube touching the bottom of tank. Remove the tube by clogging the top hole with your finger. You will see that there is enough water in the level tube to show the amount of water in the tank. Make sure that the level of water in the tube does not exceed the level of 2 liter. If the level is above 2 liter, please drain excess water.
3. Make sure that the buttons on the front panel of the device are in the off position. Connect the power plug into a grounded electrical outlet nearest to you.
4. STEAM IRONING: Set the two buttons on the front panel to the on position. Set the thermostat knob to a temperature suitable for the fabrc you are ironing.
For the device to be ready for ironing: wait for the steam lamp on the front panel to light up. (It needs about 10-15 minutes.) During this standby, assemble the two-piece wire holding fork and place it in its position. Route the iron cable through the hole in the top of the wire holding fork.
5. When the steam lamp lights up, it means that your device is ready to iron.
6. Now you can start enjoying a pleasant ironing. With the intense and continuous steam output of the device, you can iron all kinds of fabrics professionally and effortlessly in a short time. During use, you can put the iron on the ironing rest on the device.
Please note: After purchase, we will provide you with a user manual (including warnings and tips) to ensure quick mastery of core functions. Please read the instructions carefully.

Precaution:

Security Alerts
1. The device operates on 110V voltage.
2. The power outlet used must be properly grounded.
3. Never use electrical equipment with damaged cords, and always replace any damaged wiring. Similarly, if the steam hose is damaged and leaks steam, you may contact us for assistance if needed.
4. Avoid direct contact with the iron's base plate during use, as it reaches extremely high temperatures. The recommended silicone ironing mat may also become hot after prolonged use - exercise caution when handling.
5. The device continuously generates intense and high temperature steam. Always prevent steam from directly contacting the skin during operation.
6. Keep children away from the device, especially while it is powered on and in use.
7. Always unplug the device when not in use. Leaving it connected to a power outlet unattended may pose safety hazards, especially for children.
8. Exercise caution when moving the device. Improper handling may cause damage to the equipment.
9. Do not immerse the device in water or any other liquid.
10. Never open the water tank cover while the device is operating.
11. After adding water, do not overtighten the tank cover. If the cover becomes damaged due to excessive tightening, please replace it with a new one.
12. Always unplug the device from the power outlet before performing any water refilling or draining operations on the tank.
13. If the water in the tank runs out during ironing (indicated by the boiler power light turning off) but you need to continue ironing:
First, turn off the power.‌Do not open the water tank cover immediately, as residual steam may still be present. Slowly open the cover until steam begins to escape, then pause and wait for all remaining steam to dissipate completely. Once the steam is fully released, open the cover and refill the tank with an adequate amount of water.
‌Warning:‌ In this process, hot water may splash out due to the remaining heat in the steam boiler. ‌Proceed with caution.‌
14. DO NOT TRY TO REPAIR YOUR DEVICE BY YOURSELF IN CASE OF MALFUNCTION !!!
15. DO NOT OPEN THE INSIDE !!!

Item Included:

Industrial Steam Iron Electric Iron Boiler 110V (033414)