Features
Dual time MOS output module, stable and reliable timing relay module.
4 specifications are available, with 0-10 seconds, 0-100 seconds, 0-30 minutes and 0-5 hours.
High accuracy, 0-10 seconds version accuracy of 0.1 seconds
Two time composition cycle has been working
There are two potentiometers to adjust the time, widely used in timer operating equipment, intermittent work flashing circuit wiper, etc.
4 specifications are available, with 0-10 seconds, 0-100 seconds, 0-30 minutes and 0-5 hours.
High accuracy, 0-10 seconds version accuracy of 0.1 seconds
Two time composition cycle has been working
There are two potentiometers to adjust the time, widely used in timer operating equipment, intermittent work flashing circuit wiper, etc.
Specification
【Name】Double time MOS output module
【Function】Start working when power is on, with two potentiometers to adjust the time, MOS output voltage will be on for the length of time of T1 and off for the length of time of T2, two time composition cycle has been working.
【Voltage】DC7V-30V
【Operating current】No-load 10mA
【Delay range】 T1 (delay time), T2 (connection time): the same time range, there are 0-10 seconds, 0-100 seconds, 0-30 minutes, 0-5 hours four specifications.
【Adjustment accuracy】0-10 seconds version accuracy of 0.1 seconds
【Timing error】+/- 1%
【Minimum time】0.05 seconds (i.e. 20 times per second)
【Output mode] MOS output, control negative. Attention to heat dissipation treatment.
【Output capacity】20A
【Size】51.5*20*10(mm)
【Weight】10g
【Operating Temperature】-40~+85℃
【Working Humidity】0~90%RH no condensation
【Reverse protection】MOS tube is not protected, please do not reverse the positive and negative polarity of the power supply, otherwise it will burn the protection diode in the MOS tube.
【Voltage Allowable Deviation】 Not allowed to exceed 35V use, recommended for 30V or less.
【How to wire】 This module is wired for power supply positive and negative in, power supply positive and negative out.
【Name】Double time MOS output module
【Function】Start working when power is on, with two potentiometers to adjust the time, MOS output voltage will be on for the length of time of T1 and off for the length of time of T2, two time composition cycle has been working.
【Voltage】DC7V-30V
【Operating current】No-load 10mA
【Delay range】 T1 (delay time), T2 (connection time): the same time range, there are 0-10 seconds, 0-100 seconds, 0-30 minutes, 0-5 hours four specifications.
【Adjustment accuracy】0-10 seconds version accuracy of 0.1 seconds
【Timing error】+/- 1%
【Minimum time】0.05 seconds (i.e. 20 times per second)
【Output mode] MOS output, control negative. Attention to heat dissipation treatment.
【Output capacity】20A
【Size】51.5*20*10(mm)
【Weight】10g
【Operating Temperature】-40~+85℃
【Working Humidity】0~90%RH no condensation
【Reverse protection】MOS tube is not protected, please do not reverse the positive and negative polarity of the power supply, otherwise it will burn the protection diode in the MOS tube.
【Voltage Allowable Deviation】 Not allowed to exceed 35V use, recommended for 30V or less.
【How to wire】 This module is wired for power supply positive and negative in, power supply positive and negative out.
List
1 x Time delay module
1 x Time delay module