One of the mechanical adjusters in the right headlight is broken, causing the frame for the projector and reflector to move about in its housing. I removed some adjusters from an OEM e36 headlight, one looks like it may be able to be used as a replacement. I stuffed some paper inside the housing so the frame does not rattle around during storage and shipping. There are 2 chipped spots around the edge of the glass, some very light scratches on the outside of the glass, and dust on the inside. The glass lenses are available new and can be replaced if desired. The wiring harness adapters are included as shown. High beams, low beams, and all 4 angel eyes work properly. I did not test electric adjusters. These headlights are not suitable for LHD roads, because the cutoff for the projector beams is designed to cutoff higher on the left and lower on the right, see picture of beam pattern.