Feature:
1. The product is made of high-quality materials with guaranteed quality
2. This is a multifunctional three-phase brushless DC sensorless drive controller with 6 modes and limit, with 3 types of speed control signal inputs
3. Stable product performance and long service life
4. Supports wide voltage range of 6-36V and high power of 400W
5. Equipped with over temperature protection, over current protection, locked rotor protection, etc
Operating instructions for the 6-mode belt limit function:
1. Standard mode stepless speed regulation: Press and release SET1 for forward or reverse rotation, hold and press SET2 for braking and stop at limit position
2. Automatic mode stepless speed regulation: Press the SET1 key to start SET2, stop when encountering a limit, and use the limit switch to achieve automatic back and forth repeated operation
3. Inching mode, stepless speed regulation, press SET1 key, forward rotation, release stop, press SET2 key, reverse rotation, release stop, limit stop
4. Single round trip mode stepless speed regulation. Press SET1 key to start SET2 and stop. When encountering limit stop, automatic round trip operation is achieved through limit switch
5. Single trigger mode stepless speed regulation. Press SET1 key to start SET2. Stop when encountering limit switch. Press SET1 key to start forward rotation. Stop when encountering forward rotation limit switch K1. Press SET1 key again to start reverse rotation. Stop when encountering reverse rotation limit switch K2
6. Standard mode level triggered stepless speed regulation Press SET1 once for forward rotation, press SET2 once for reverse rotation, press SET2 once for braking, and press once for no braking to stop at the limit position
7. When the motor is in a stopped state with power on, SET1 and SET2 can be pressed while the LED flashes to turn on or off the brake function during the motor reversing buffer stop
Instructions for switching to 6 modes:
6 modes of switching LED flashing definition: slow flashing once, standard mode, slow flashing twice, automatic mode, slow flashing three times, jog mode, slow flashing four times, single round trip mode, slow flashing five times, single trigger mode, slow flashing six times, standard mode, low level trigger. Below are the instructions for switching 6 modes:
First, press and hold both SET1 and SET2 keys simultaneously, and then turn on the power. At this time, the LED flashes and turns off, indicating that the mode has entered the mode switching state. The LED flashes several times to indicate which mode is currently selected (the default standard mode at the factory). Then, press and hold the SET2 key briefly, and the LED flashes and turns off several times according to the definition. If you want to switch to the current mode, At this point, pressing and holding the SET2 button will change the LED from off to on, saving the currently selected mode and automatically exiting the mode switch. To watch the operation video, please click on the following link: http://cloud.video.taobao.com/play/u/null/p/1/e/6/t/1/418388544709.mp4
Instructions for switching three speed control signals:
Three types of speed regulation signal switching LED flashing definition: fast flashing, one simulation value 1-4.2V (required for Hall handle), input fast flashing, two PWM inputs, fast flashing, three simulation values 0-5V input. Below are instructions for switching the three types of speed regulation signals:
Press and hold the SET2 key first, and then turn it on again. At this time, the LED flashes and goes out, indicating that the speed control signal input switching state has been entered. The LED flashes several times to indicate the currently selected input method (default analog output 0-5V input), and then briefly press the SET2 key. The LED flashes and goes out several times to indicate the currently selected input method. To select the current input method, press and hold the SET2 key again, The LED changes from off to permanently on, saving the currently selected input method and automatically exiting the speed control signal switch. Please click on the following link for the operation video: http://cloud.video.taobao.com/play/u/null/p/1/e/6/t/1/418746621191.mp4
Special instructions for external signal input:
1.0-5V input mode: press the key to switch to the 0-5V input mode, input the signal from the wiring terminal to the 0-5V analog quantity, control the speed regulation to not exceed 5V, drive the factory default this mode (the board has its own Potentiometer adjusted to the minimum remember), and the weak current signal is directly input to the MCU master control, and cannot touch and contact the high voltage
2.1-4.2V input mode
3. PWM input mode: press the key to switch to PWM input mode, and the signal is input from the wiring terminal to control the speed regulation amplitude of 3-5V, frequency of 1K-10K, which is the best (the Potentiometer on the board is set to the minimum). The weak current signal is directly input to the MCU master control, and the high current cannot be touched or contacted
4. The external interface of the forward and reverse braking function has an optical coupling isolation and can be controlled by an external switch or MCU to provide low-level signals
Interface Description:
1. U V W 3-phase DC output connected to brushless motor
2. 5V GND motherboard comes with 5V (external output current within 100MA)
3. VCC GND driver main power supply (external DC power supply)
4. FG speed pulse signal output (our store has matching Tachometer for sale)
5. DIR forward and reverse control is effective at low levels (can be externally switched)
6. BRAKE brake control active brake low level effective (can be externally switched)
7.0-5V 1-4.2V PWM speed regulation control signal three input terminals (the board is equipped with a Potentiometer for speed regulation, and 0-5V analog PWM duty ratio signal can also be connected externally for speed regulation)
Main board specifications and parameters:
Product name: ZS-X14
Working voltage: 6-30V (limit 36V)
Drive current: rated 18A, with heat dissipation treatment of 25A
Power: rated 250W-300W, peak 400W (please leave margin for use)
Overcurrent protection: Yes
Locked rotor protection: Yes (after locked rotor, the current automatically drops and runs in isolation)
Over temperature protection: Yes (over temperature power reduced by half)
Maximum speed: 224000 RPM (2-pole motor), 74000 RPM (6-pole motor), 40000 RPM (12-pole motor), 35000 RPM (14-pole motor)
Precautions:
1. Reverse connection of the positive and negative poles of the power supply on the motherboard can cause permanent damage to some chips on the board (even if the current is high for a few seconds)
2. During normal operation, the motor output terminal has sampling overcurrent protection. Due to the high power and current of the module, please do not artificially short circuit the module when it is not working properly. However, there is a possibility of burning the circuit and exploding the tube. For the first wiring test, please use a low current and low voltage test. After it is OK, apply high current and high voltage again. As it is a bare board module, pay attention to the insulation of the wiring head and avoid strong voltage touching the parts on the board
3. Do not connect motors that do not match or differ significantly from the voltage, current, and power of the drive module to avoid product damage
Shipping list:
Controller X1
Terminal wire X1