Iron Plate Bender Manual Sheet Metal Iron Aluminum Copper Plate Bending Machine
Specifications:
Two-in-one enhanced bending machine has the following characteristics, bending function at the same time increase the bending function, tin plate, stainless steel round iron can be bent to increase the convenience and improve efficiency.
In terms of structure, the application of the centerline 45-degree platen and thickened platen strips, in the bending of a wider angle, more expansive. Bending plate integration is a 180-degree rotating structure, the thinner tin plate can be crimped or flap to enhance the hardness to adapt to different thicknesses increased up and down the front and back adjustable screws folding angle will be more straight and more beautiful: bending round steel bar stainless steel features press-fitted slipcover, bending the bar more energy-saving resistance is smaller, the more rounded angle of the bending, removable double-handed handle is easy to carry and take up little space, four holes can be located in a desktop fixed feet with a Smoother.
Bending angle: 0-180 degrees (45 degrees below the completion of two times)
Bending width.
(maximum) 140 models bilateral 110mm single 140mm weight: 4.5kg
210 models bilateral 180mm single side 210mm weight: 6.2kg
310 models bilateral 280mm single side 310mm weight:9.7kg
410 models bilateral 380mm single side 410mm weight:13.5kg
Bending length: (minimum) 50x14mm (show the minimum size of the pressure plate)
Bending thickness: 0.1-2mm (2mm or more depends on the material used, the width of the plate) bending parameters: round bar 3-8mm (10mm) (stainless steel to reduce a level)
Instructions
Installation, this machine has two split handles. Generally, there is no need to fix it.
The two handles can be used directly for bending. If possible, use the four mounting
holes on the machine to fix it. This will save effort and use more smoothly.
To adjust the plate thickness, insert one piece of the plate (or something of equal thickness)
to be bent under the pressure plate first. The plate should not be placed too far in the front,
and the other piece should be inserted about 1 cm in front, and then the upper pressure
screw is lightly tightened by hand. Next, turn the flap up to form a 90-degree angle with the
pressure plate, insert the other one to the end, and then tighten the front and rear
adjustment screws until the pressure plate is in contact with the inserted plate, and the
thickness adjustment is completed. This is because the spacing can be completely pressed
in place with the adjustment method.
Fold the plate, insert the lower material into the bending machine, adjust the position to be
bent, and tighten the upper pressure screw. At this time, the tightness of the upper pressure
screw will affect the straightness of the bending angle. Generally, tools are used Just screw it
to a little tight. The front and rear adjustment screws are adjusted in the front and generally
do not need to be moved. Turn the flap to start bending and bend the required angle. At this
time, the pressure plate is firmed by the deformation force of the bending angle, and the
upper pressure screw is loosened firmly. The front and rear adjustment screws are not
needed. , Take out the bent workpiece.
There are two biggest relationships between the radian of the angle and the ideal angle to be
folded. One is the strength of the fuselage, and the strength of the fuselage has a certain
relationship with the bent sheet, thickness and width. The other is the density of the spacing
adjustment. The corners that will be folded together will be straight and beautiful.
1.Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.
2. Any Customs tax applied to this package should be covered by buyers.
3.As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges.These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office.
