MegaWell-Boating-Parts
Inspired by the same grit and passion that power your epic experiences, Megawell-Boating products provide performance, protection and peace of mind for enthusiasts like you on the water, street, track and trail. Any adventure is possible with here at your side.
Skeg Repair Guard Replace Panther SkegGuard # 35SS610 Fit:
- Mercury Mercruiser Alpha 1 Gen 2 Drives 1991-Present Years.
Skeg Guards Repair Kit include Suzuki, Yamaha, Honda, Tohatsu, Mercury Mariner, Evinrude Johnson OMC BRP and so on.
Package Include
Kit Contents:
1 X Skeg Guard
1 X Self-Locking Hardware Kit (4 Male & Female Stainless Locking Screws)
2 X Hex Key Tools
1 X 1/4 Inch Drill Bit
1 X Self-Locking Hardware Kit (4 Male & Female Stainless Locking Screws)
2 X Hex Key Tools
1 X 1/4 Inch Drill Bit
What is a Megawell-Boating-Skeg-Guard ?
A Megawell-Boating-Skeg-Guard is a 316 stainless steel protection and repair accessory designed for boat motor skegs, which are the fin-like extensions at the bottom of outboard or sterndrive motors that help with steering and stability. It serves two primary purposes: protecting a skeg by reducing wear and damage from minor impacts and repairing or replacing a damaged or broken skeg.
Ideal for boaters in shallow or rocky waters, where skegs are prone to damage from submerged hazards. It is also useful for those who frequently launch or trailer their boats, as ramp dragging can wear down the skeg. A practical solution for boaters looking to restore functionality to a damaged skeg without costly repairs.
Why should I buy the Megawell-Boating-Skeg-Guard ?
Megawell-Boating-Skeg-Guard is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable. This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging.
Megawell-Boating-Skeg-Guard conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.
Secured with self-locking hardware, the Megawell-Boating-Skeg-Guard can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.
If replacing an already broken skeg, the Megawell-Boating-Skeg-Guard can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.
Does the Megawell-Boating-Skeg-Guard have a drain hole?
Yes, the Megawell-Boating-Skeg-Guard includes a drain hole to prevent water from collecting, which helps avoid corrosion and potential freezing damage.
Yes, the Megawell-Boating-Skeg-Guard includes a drain hole to prevent water from collecting, which helps avoid corrosion and potential freezing damage.
How much of the original skeg needs to be remaining for installation?
You need at least 2 to 3 inches of the upper skeg remaining to securely mount the Megawell-Boating-Skeg-Guard.
You need at least 2 to 3 inches of the upper skeg remaining to securely mount the Megawell-Boating-Skeg-Guard.
Can a Megawell-Boating-Skeg-Guard be installed if my skeg is cracked but not broken off?
Yes, as long as the crack doesn’t compromise the skeg’s structural integrity or prevent a snug fit.
Yes, as long as the crack doesn’t compromise the skeg’s structural integrity or prevent a snug fit.
Does the Megawell-Boating-Skeg-Guard make the motor noisier or vibrate more?
The Megawell-Boating-Skeg-Guard is designed to conform to the skeg, so it doesn’t typically alter sound or handling.
If you want any other parts what you cann't find on the store, welcome to leave message to us!