The console and screen in the picture are both being powered by an INIU 27000mAh 140w powerbank, the ultimate portable Gamecube experience.
The fine print:It is the buyer's responsibility that a compatible and adequate USB-C wall charger is being used with this cable. Most USB-C Power Delivery wall chargers support 12 volts, but some do not. For example some Anker chargers do not output 12 volts and a few other brands depending on the model do not, so check the specs on the wall charger prior to purchase.Refer to the specs on your wall charger if you choose to opt out of the one I will be supplying (for an additional cost). It is recommend that the minimum wall charger being used is capable of delivering 45 watts (2A at 12V).
This GameCube USB-C PD cable can also be powered by a battery bank so long as the specs meet the power requirements of the Nintendo WII.
The Nintendo WII natively runs on a large power brick that requires 45 watts of power (12v at 2A). During testing actual power draw is significantly less, Approx 15 watts. It's worth noting that recommend power draw from the wall charger should not exceed 80%, there for drawing 15 watts from a 45 watt charger is perfectly acceptable.
Depending on your console specific set-up your mileage may vary with using a 45 watt wall charger and may want to obtain a wall charger with a greater amperage capacity such as a 45 watt charger. Please ensure that it does indeed output 12 volts.
Purchase Options
Cable only.
Cable and usb c 45w compatible plug.
Cable and usb c 45w compatible plug & Bitfunx Hdmi Adapter.
The 45w Plug supplied is a uk 3 pin plug.
Console not included.
Cable length is 2 meters (~6 feet)