Product name：XGS PON STICK ONU MAC IC ：Maxlinear PRX126 Product features： 3.3V Power supply Support 20km transmission distance with SMF Support data encryption Support VLAN function setting Support software on line upgrading. Support fault alarm Support dynamic bandwidth allocation Support transparent multicast transmission Support SC / APC or SC/UPC connector Complies with SFP+ MSA (SFF-8431) Complies with RoHS
Standard:
Complies with ITU-T G.987.2 Complies with ITU-T G.9807.1, G.9807.2 ITU-T G.988 OMCI L2 MAC Bridge (Up to 64 L2 bridges) G.8275/Y.1369/IEEE 1588v2 IEEE 802.1ag and ITU-T Y.1731 Ethernet OAM delay & loss measurement hardware support
xgspon onu stick with bigger heat sink
Application:
The XGS PON STICK optical module can fully comply the requirements of Telecom grade FTTB,
FTTH, and FTTO devices. It can be hot plugged into the 10G SFP+ slot of a layer 2 Ethernet switch
to work as an ONT, allowing the entire device to be directly connected to the XGSPON optical
network. The central OLT only needs to register the XGS PON STICK optical module like a regular
optical modem, and the communication device can complete the access switch from the original
P2P network to the PON network.
FTTH, and FTTO devices. It can be hot plugged into the 10G SFP+ slot of a layer 2 Ethernet switch
to work as an ONT, allowing the entire device to be directly connected to the XGSPON optical
network. The central OLT only needs to register the XGS PON STICK optical module like a regular
optical modem, and the communication device can complete the access switch from the original
P2P network to the PON network.
1) Insert the XGS PON STICK module into the optical port of the switch or router and verify if it can be pinged; 2)Login method: SSH login (Telnet method is currently not supported) The IP address of the STICK module is 192.168.1.1
User name ：root
No password
No password