Starrsea Anti Fog Belt Lens Dew Heater Heating Demister Strap for Camera/Telescope

 

• Safety Protection: Protect your digital camera lens or viewfinder from freezing due to cold fog and dew, allowing the device to work well at night where temperatures drop or weather is inclement.

• Intelligent temperature control, capable of setting heating temperature and heating time

• The graphene material used inside the dew heater strip, combined with intelligent temperature control, heats up faster, heats up more evenly, and has a longer service life.

• The heating temperature can be set to 35-65 ℃, and the timing can be set to 1-12 hours. The intelligent display screen is convenient for operation and use

 

Specification

• Input: 12V 2.5A

• Power port: DC5521

• Cable length:1.5m

 

Instructions:

1. Press the power button to turn on the thermostat.

2. First, set the time (the default heating time for the first startup is 1 hour), press the timer button, set the heating time (1-12 hours), wait for about 5 seconds, and the heating time number on the display will start flashing. The flashing number indicates that the set time has been determined.

3. Press the heating/cooling button to enter the temperature setting interface, and select the appropriate heating temperature.

4. To change the set time midway, simply press the timer button, reset the heating time, wait for the number to flash (indicating that the set time has been determined), and then press the temperature increase/decrease button to return to the temperature interface.

Note: In the presence of temperature differences, the actual temperature that can be reached by heating will be slightly lower than the set temperature