Model: SD-102 Portable Delivery Unit

Technical data
Model:BD-402 Portable Dental Unit
Votalge: 110 V/60Hz,
Power:550W

Speed R.P.M:1400r/min
Air Flow:65L/min
Pressure:0.6Mpa
Net Weight:16Kgs
Gross Weight:19Kgs
Noise:40dB
Packing Size: 46*35*50cm

Note: This product is only suitable for 110V voltage, please do not use 220-240V voltage, as 220-240V will cause the machine to burn out.


Standard Accessoiries:
Oiless Air Compressor Motor 1pc
3 Way-Springe 1pc
High Speed Handpiece Pipe 1pc
Low Speed Handpiece Pipe 1pc
High Suction(Ajust) 1pc
Water Bottle 1pc
Drain Bottle 1pc
Foot Control 1pc

Safety Guidelines
1, Before operating the unit, please read the manual carefully and preserve it for future reference.
2, Please operate and maintain the unit strictly in accordance with the operational instructions.
3, The user should read the instructions supplied with the dental unit carefully.
4, Symbol “Attention” denotes that before using the device, read the operating manual carefully and carry out all the instructions to avoid any damage or injury.
5, Please contact the local agent or the manufacturer if the unit needs repairs. We will supply a high quality of service and assistance for you.

Warning:
1 The power switch should be turned off when the machine stopped working, the transformer and solenoid valves will heat to burn if long-term power or no stop the power.
2. Please drain off the water when the water on 2/3 of Suction bottle, the water will come to motor if the water is higher than 2/3 on suction bottle, the air motor will leakage of electricity or burn if the water come to air motor.

------------------------------------
 

SD-203 Portable Dental Chair
 
Height of seat surface above ground: 240~640(mm)
Range of back rest angle: 100°~175°
Loading capacity: Standard for dental patient (135kg)
Illumination: Electric LED light with Plug
Power Supply: 110VAC~240VAC ,50Hz~60Hz
Capacity of battery: 300mAh
Duration of service: 18h (weak) or 9h (strong), reusable after charging
G.W.: 33KG
SIZE: 104*58*30 cm

This product is a new generation of folding chair designed on the basis of original model BD-503 portable chair by changing the original halogen bulb into LED spotlight illumination By adopting modern human engineering theory, the length and width of the chair are extended by 50mm and 40mm respectively, a basin support and a waste basin are added at the right side, and it is changed from half-folding to full-foldable mechanism (without using screw driver and wrench), the right/left arm rest is modified into stationary type to become more solid and stable, while the total weight is reduced by 2kg. It is suitable for a lot of applications such as dental treatment, transfusion, beauty salon, leisure resting, etc.
 
 
 
Datacaciques