VW VR6 Corrado Golf 1 2 3 Compression Reduction Turbo 2.5mm AAA

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


WP special parts logo

NEW compression reduction VR6 for Reinz/Elring metal seal NEW

This VDR plate is specially designed for the use of Reinz/Elring metal multi-layer seals (0.6mm) compression reduction for the VR6 2.8-2.9 12V in 2.5mm steel incl. Sleeve for the chain tensioner..

When using 2 metal gaskets (0.6mm) + 2.5mm plate you can achieve a new compression ratio of 8.44: 1. Complete offers with metal multi-layer gaskets and integrated coated intermediate plates can be found in our shop under "Compression reduction". You can of course also order the matching seals from Elring in our shop.

When converting to turbo or The compression of the compressor must be reduced, which can be done using special pistons or an intermediate plate.

This means that significantly higher boost pressures and outputs can be achieved without driving at the knock limit.

The original pistons would also not withstand the temperatures under "forced ventilation" with standard compression.

Of course, other strengths are also possible on request.

Made in Germany

Matching VR6 cylinder head screws from Reinz can be found under the eBay number. 201509297075

The overview shown here shows which models or Motors the intermediate plate offered can also be installed:

MANUFACTURERMODELTYPEKWBJ-FROMBJ-BIS
FORDGALAXY (WGR)2.8 i V612803/1995
FORDGALAXY (WGR)2.8 i V6 4x412803/1995
FORDGALAXY (WGR)2.8 V615003/1995
MERCEDES BENZV-CLASS (638/2)V 280 (638.244)12802/199607/2003
VWCORRADO (53I)2.9 VR614008/198712/1995
VWGOLF III (1H1)2.8 VR612808/199108/1997
VWGOLF III (1H1)2.9 VR6 Syncro (1HX1)14008/199108/1997
VWGOLF III Variant (1H5)2.9 VR614007/199304/1999
VWGOLF III Variant (1H5)2.9 VR6 Syncro14007/199304/1999
VWPASSAT (3A2, 35I)2.8 VR612802/198808/1996
VWPASSAT Variant (3A5, 35I)2.8 VR612802/198805/1997
VWPASSAT Variant (3A5, 35I)2.9 VR6 Syncro13502/198805/1997
VWSHARAN (7M8, 7M9, 7M6)2.8 VR612805/1995
VWSHARAN (7M8, 7M9, 7M6)2.8 VR6 Syncro12805/1995
VWTRANSPORTER T4 Bus (70XB, 70XC, 7DB, 7DW)2.8 VR 610309/199004/2003
VWVENTO (1H2)2.8 VR612811/199109/1998

Comparable with OE numbers Comparable with numbers from manufacturers VW 021103383 VW 021103383 VW 025.440

AJUSA10095300
ELWIS ROYAL0055561
GLASSER50379
ELWIS ROYAL0056091
ELRING401.820
ELRING917.908
GLASSER50150
GOETZE30-027920-00
PAYAA5430


dewabit

This VDR plate is specially designed for the use of Reinz/Elring metal multi-layer seals (0.6mm) compression reduction for the VR6 2.8-2.9 12V in 2.5mm steel incl. Sleeve for the chain tensioner.. When using 2 metal gaskets (0.6mm) + 2.5mm plate you can achieve a new compression ratio of 8.44: 1. Complete offers with metal multi-layer gaskets and integrated coated intermediate plates can be found in our shop under "Compression reduction". You can of course also order the matching seals from Elring in our shop. When converting to turbo or The compression of the compressor must be reduced, which can be done using special pistons or an intermediate plate. This means that significantly higher boost pressures and outputs can be achieved without driving at the knock limit. The original pistons w