VW VR6 Turbo 3mm Compression Reduction 12V Golf 1 2 3 4 Corrado Passat

The description of this item has been automatically translated. If you have any questions, please feel free to contact us.


WP special parts logo

NEW compression reduction VR6 for Reinz/Elring metal seal NEW

Compression reduction for the VR6 2.8-2.9 12V in 3mm steel

This VDR plate is specifically for the use of Elring/Reinz metal multi-layer seals

When using 2 metal seals (0.6mm) + 3mm plate you achieve a new compression ratio of 8.15: 1

Matching VR6 cylinder head screws from Reinz can be found under the eBay number. 201509297075 You can of course also order the matching seals from Elring in our shop.

When converting to turbo or The compression of the compressor must be reduced, which can be done using special pistons or an intermediate plate.

This means that significantly higher boost pressures and outputs can be achieved without driving at the knock limit.

The original pistons would also not withstand the temperatures under "forced ventilation" with standard compression.

Of course, other strengths are also possible on request.

Made in Germany

The overview shown here shows which models or Motors the intermediate plate offered can also be installed:

MANUFACTURERMODELTYPEKWBJ-FROMBJ-BIS
FORDGALAXY (WGR)2.8 i V612803/1995
FORDGALAXY (WGR)2.8 i V6 4x412803/1995
FORDGALAXY (WGR)2.8 V615003/1995
MERCEDES BENZV-CLASS (638/2)V 280 (638.244)12802/199607/2003
VWCORRADO (53I)2.9 VR614008/198712/1995
VWGOLF III (1H1)2.8 VR612808/199108/1997
VWGOLF III (1H1)2.9 VR6 Syncro (1HX1)14008/199108/1997
VWGOLF III Variant (1H5)2.9 VR614007/199304/1999
VWGOLF III Variant (1H5)2.9 VR6 Syncro14007/199304/1999
VWPASSAT (3A2, 35I)2.8 VR612802/198808/1996
VWPASSAT Variant (3A5, 35I)2.8 VR612802/198805/1997
VWPASSAT Variant (3A5, 35I)2.9 VR6 Syncro13502/198805/1997
VWSHARAN (7M8, 7M9, 7M6)2.8 VR612805/1995
VWSHARAN (7M8, 7M9, 7M6)2.8 VR6 Syncro12805/1995
VWTRANSPORTER T4 Bus (70XB, 70XC, 7DB, 7DW)2.8 VR 610309/199004/2003
VWVENTO (1H2)2.8 VR612811/199109/1998

Comparable with OE numbers Comparable with numbers from manufacturers VW 021103383 VW 021103383 VW 025.440

AJUSA10095300
ELWIS ROYAL0055561
GLASSER50379
ELWIS ROYAL0056091
ELRING401.820
ELRING917.908
GLASSER50150
GOETZE30-027920-00
PAYAA5430


dewabit

When using 2 metal seals (0.6mm) + 3mm plate you achieve a new compression ratio of 8.15: 1 Matching VR6 cylinder head screws from Reinz can be found under the eBay number. 201509297075 You can of course also order the matching seals from Elring in our shop. When converting to turbo or The compression of the compressor must be reduced, which can be done using special pistons or an intermediate plate. This means that significantly higher boost pressures and outputs can be achieved without driving at the knock limit. The original pistons would also not withstand the temperatures under "forced ventilation" with standard compression. The overview shown here shows which models or Motors the intermediate plate offered can also be installed: Comparable with OE numbers Comparable with numbers from