NEW
Compression reduction VR6 for Reinz metal seal NEW
This VDR plate is specially designed for the use of Reinz metal-Multi-layer seals (0.6mm)
Compression reduction for the VR6 2.8-2.9 12V in 1.5mm steel
Achieved when using 2 metal gaskets (0.6mm) + 1.5mm plate
gives her a new compression ratio of 9.1: 1
Complete offers with metal multi-layer seals and integrated
coated You can find intermediate plates in our shop under “compression reduction”.
You can of course also order the matching seals from Reinz in our shop.
Matching VR6 cylinder head screws from Reinz can be found under eBay number. 191131098469
When converting to turbo or The compression of the compressor must be reduced, which can be done using special pistons or an intermediate plate. This means that significantly higher boost pressures and outputs can be achieved without driving at the knock limit. The original pistons would also be subject to the temperatures “Forced ventilation”. Cannot withstand standard compaction.
Of course, other strengths are also possible on request.
Made in Germany
|
