Tool Information
Manufacturer	SGS KYOCERA
EDP Number	47045
Type	Z-CARB Z5MCR - 5 Flute Variable Helix & Pitch Roughing End Mill
Material Specification	Solid Carbide Ti-Namite-M Coated
Application	Chatter-resistant Machining for Steel and Difficult-to-Cut Material
Diameter	16mm
Overall Length	92mm
Flute Length	35mm
Corner Radius	4mm
Shank Diameter/Type	16mm - DIN 6535 - Form HB with One Drive Flat
Quantity Supplied	1
Condition	New/Unused/Boxed
Information	The Z-Carb HPR Five Flute Roughing End Mills are ideal for achieving high metal removal rates (MRR) and a finish of 80 RMS or better on most materials. The specialized five flute design is engineered for increased productivity over three and four flute end mills. The variable indexing geometry allows for improved chatter suppression over symmetrical designs. Specially designed radial rake balances positive cutting action and edge strength. End grind features include a positive axial rake for high-performance shearing and lifting of material and increased clearances to eliminate edge build-up during ramping. Enhances chip removal when pocketing or slotting. Select fractional and metric diameters in stock. Specialized five-flute design is engineered for strength, chip evacuation, and increased productivity over three and four-flute end mills by 20–40%. The variable flute pattern provides excellent chatter suppression over a range of spindle speeds. The open-center design delivers efficiency during entry movements into the workpiece. Helix angle engineered for balance between positive cutting action and reduced contact area to control tool pressure and spindle load. Ti-Namite-M coating features include high wear resistance, reduced friction, and excellent prevention of edge build up. This coating provides superior material removal rates and tool life when used in high performance operations with difficult to machine materials like Titanium. Characteristics • Solid Carbide with Ti-Namite-M Coating • Centre Cutting • An Ideal Balance of Helix, Indexing, Flute Depth, Rake and Relief • Variable Indexing for Chatter Supression and Patented Edge Geometry for Shearing and Strength • Chatter-Free Geometry Allows Deep Cutting and High Speed Machining • Enhanced Corner Geometry with Tight Tolerance Corner Radii • Excels at Roughing, Ramping, High Speed Machining and Finishing in a Variety of Materials • Recommended for Materials ≤ 45 HRc (≤ 420 Bhn)
DISCLAIMER
The technical information provided in this listing is for general guidance only and has been taken from literature provided by manufacturers. Every reasonable care has been taken to ensure this information is accurate and correct and we do not accept any responsibility or liability for errors or omissions or any information that is found to be misleading. For more detailed technical information and to check this information please consult the manufacturers own literature or websites which in general have an extensive array of technical literature available.