The 85-2 digital constant temperature magnetic stirrer adopts a high-quality DC motor with low noise and smooth speed regulation. The fully enclosed heating plate can be used for auxiliary heating and can be used for long-term heating. A stirrer refined from polytetrafluoroethylene and high-quality magnetic steel, resistant to high temperature, wear, chemical corrosion, and strong magnetism. It can be mixed in a closed container, which is very ideal and convenient to use. The mixer can set temperature and display temperature, and can be used for long-term heating. The digital display is intuitive and accurate.

Performance of 85-2 digital constant temperature magnetic stirrer:

1. Power supply single-phase AC 50Hz, 220V

2. Motor power: 20W hot wire power 250W

3. Stepless speed regulation: 0-2400 rpm

4. Digital display constant temperature, room temperature~99.9 degrees Celsius

Usage of 85-2 digital constant temperature magnetic stirrer:

When using the 85-2 digital constant temperature magnetic stirrer, first check if the accessories are complete, then install the fixtures in order and place the solution to be stirred in the center of the chrome plating plate. Add the solution and place the stirrer in the beaker solution. First, plug in the power plug of the instrument, then turn on the power and turn on the speed control switch. The indicator light will light up, indicating the start of operation. Then, select the temperature you need. The speed control is gradually adjusted from low speed to high speed, and it is not allowed to start directly at high speed to avoid the stirrer being out of sync and causing jumping. Heating cannot be done without stirring, and there is a band switch control for heating, Cut off the power when not working. The instrument should be kept clean and dry, and solution is strictly prohibited from entering the machine.

85-2 digital display constant temperature magnetic stirrer precautions:

(1) When stirring, if the stirrer jumps or does not stir, check if the beaker is stable and if the position is correct.

(2) Medium speed operation can extend service life

(3) Please connect the ground wire when using it

List of complete machines for 85-2 digital display constant temperature magnetic stirrer:

1. 1 complete machine

2. 1 stirrer

3. 1 power cord

4. 1 chrome plated upright pole

5. 1 chrome plated cross joint

6. 1 rubber clamp

7. Two rubber wood support screws