Highest Quality
Non Chlorine Shock Oxidiser
WHY SHOULD YOU CHOOSE CrystalClear® NON CHLORINE SHOCK?
It's simple!
It is more cost effective than other Non Chlorine Shocks with often 50% less needed to achieve the same results.
Other cheaper non chlorine shocks require 15g to 30g per 500 litres of water whereas 15g of CrystalClear® will treat 1000 litres of pool or hot tub water, meaning this shock can out perform others up to 4x as much.
HERE'S THE MATHS!
1kg cheaper non chlorine shock e.g £12.99 would treat a 1000 litre hot tub 16.6 times
1kg of CrystalClear® costing just a couple of ££ more would treat the same tub 66.6 times
You would need to purchase 4 x 1kg tubs at £12.99 (total £51.96) to achieve the same results.
CrystalClear® non chlorine shock offers a robust solution for pool and
hot tub enthusiasts seeking a clean and clear bathing experience without
the use of additional chlorine, bromine or salt (salt water systems).
This highly effective Non Chlorine Shock Oxidiser is of the highest quality and effectively combats chloramines and helps improve water clarity, and oxygen levels.
Suitable for spas, hot tubs and swimming pools, this
product will enhance the sanitary environment without the addition of
further chemicals.
Crafted in the United Kingdom, this water treatment is simple to use with full instructions included.
Our unique formula targets and eliminates
contaminants, maintaining a pristine pool or hot tub while promoting a
healthier ecosystem.
- For use in systems using Bromine, Chlorine or Salt Water systems.
- Can be added directly to warm pool or hot tub water above 23°C.
- Can help re-activate existing bromine ions negating the need for further bromine and reduces the load on you main sanitisers (chlorine,bromine or salt) ultimately reducing the need for further chemicals.
TRANSFORMS HOT TUBS IN MINUTES

*Sufficient (main) sanitiser (bromine, chlorine, salt) should be present in the water.
Non Chlorine Shock is not a substitute for a main sanitiser and works in conjunction with it.
Watch our short product overview video below on
How to apply CrystalClear® Non Chlorine Shock Oxidiser to
Hot Tubs & Above Ground Pools
=============================================
Want to see why using an Oxidiser is IMPORTANT!
See this video below
EASY POOL & HOT TUB CARE
Click the link below to see our helpful video
3 STEPS TO EASY POOL CARE
Directions for use;
Non chlorine shock should be used to prevent your pool or spa water from deteriorating. When added to your pool or spa or a weekly basis or after heavy use, you will minimise unpleasant odours and eye burn. Non chlorine shock oxidises and removes organic contamination from water without increasing chlorine levels. Non chlorine shock is ideal for chlorinated, brominated or salt water systems. Oxidisers should not be used as an alternative to your day to day sanitiser - but in conjunction with it.
Dosage Rates;
Recommended dose rate add 500g per 45 cubic metres (45000 litres) of pool water (10,000 gallons).
For spas add at 15g per 1000 litres of water (220 gallons)
Full instructions are on the product label.
Always check your chlorine or bromine levels regularly with a test kit.
Shipping is via Royal Mail Tracked 48
Optional faster shipping using Royal Mail Tracked 24 is available for £1 more which may include a Sunday delivery if ordered on a Saturday - dependent on location.
Same day dispatch on orders received before 3pm (Mon-Fri) 11am (Sat)