Programmed 2010-2012 Yukon Fuel System Control Module | 20827745

Programmed 2010-2012 Yukon Fuel System Control Module | 20827745
One Year Warranty

End Stalling and No-Start Issues in Your GM Truck or SUV

Is your 2010-2012 Yukon, Tahoe, or Silverado suddenly stalling, hesitating, or refusing to start? Before you spend hundreds on a new fuel pump you may not need, the problem is likely a faulty Fuel System Control Module (FSCM). This critical component regulates voltage to the fuel pump, and when it fails, it creates frustrating and unreliable performance. This replacement module is the definitive, hassle-free solution to get your vehicle back on the road with confidence.

Common Symptoms & Your Direct-Fit Solution

A failing FSCM can be tricky to diagnose because its symptoms often mimic a bad fuel pump. If you’re experiencing any of the following, this module is your solution:

  • Engine cranks but will not start
  • Vehicle starts and then immediately stalls
  • Stuttering or hesitation during acceleration
  • Loss of engine power, especially under load
  • A Check Engine Light with diagnostic trouble codes (DTCs) such as P069E, P0230, or P0606

This isn’t just a replacement part; it’s a complete, ready-to-install solution. We professionally program the module to your vehicle’s specific VIN before it ships, loading it with the latest stable software from GM. This saves you a costly trip to the dealership and ensures perfect communication with your vehicle’s computer system from the moment you plug it in.

Features & Benefits

  • ✔ Arrives Ready to Install: No expensive trips to the dealership for programming. We flash this module with the latest GM software using your vehicle’s VIN, ensuring a true plug-and-play installation.
  • ✔ Restore Factory Performance: This module is built to meet original equipment specifications, restoring the precise fuel pressure and engine reliability you depend on for work and family.
  • ✔ Eliminate Fuel Delivery Problems: Directly addresses the root cause of common issues linked to codes like P069E, getting your truck or SUV running smoothly again.
  • ✔ Broad GM Vehicle Compatibility: A direct replacement for multiple part numbers including 20791901, 20877116, and 20850927, covering a wide range of popular GM trucks, vans, and SUVs.
  • ✔ Purchase with Confidence: This unit is backed by our one-year replacement warranty.

Expert Technician’s Insight

As a technician with over 20 years of experience, I’ve seen countless dollars wasted on new fuel pumps when this Fuel System Control Module was the real problem. Located on the frame rail, these modules are exposed to road salt, water, and vibration, leading to internal corrosion and failure. The symptoms—stalling, long crank times—mimic a weak pump perfectly. The key difference is that this pre-programmed 2010-2012 Yukon Fuel System Control Module saves you the diagnostic headache and the dealership’s programming fee, making it the smarter, faster repair.

Frequently Asked Questions

Do I need to get this module programmed by a dealer?

No. The main benefit of our service is that we program the module to your vehicle’s specific 17-digit VIN before we ship it to you. It arrives ready for a direct, plug-and-play installation, saving you time and money.

Where is this module located on my vehicle?

On most trucks and SUVs like the Yukon, Tahoe, and Silverado, the FSCM is mounted to the driver’s side frame rail, near the spare tire. It’s typically held in place by a few bolts and has one electrical connector, making it accessible for a DIY replacement.

How do I provide my VIN for programming?

After you complete your purchase, simply send us a message with your vehicle’s 17-digit VIN. We cannot ship your order until we receive this information, as the programming is essential for the part to function.

Is this the same as a Fuel Pump Driver Module (FPDM)?

Yes, the terms Fuel System Control Module (FSCM) and Fuel Pump Driver Module (FPDM) are often used interchangeably by manufacturers for this component. It performs the same function of controlling the fuel pump.

Will this fix a P069E trouble code?

Yes, the code P069E (Fuel Pump Control Module Commanded OFF) is one of the most common indicators of a failed FSCM. Replacing the module with this pre-programmed unit is the correct and reliable fix for this specific code.

Product Details

Category: Fuel Pump Control Module (FPCM)

eBay Item ID:

To program your module, we require your full 17-digit VIN. Please enter it in the payment notes and save to ensure we receive it. Orders without a VIN within our 2-business-day handling period may be canceled, as programming cannot proceed without it.

Shipping

  • Processing Time:
    Reliably shipped within 2-3 business days.

Warranty

Enjoy peace of mind with a one-year replacement warranty on this part, effective from the date you receive it. Labor costs are not covered.

If the part fails within the warranty period, we’ll replace it with a comparable unit or refund your purchase price, ensuring a hassle-free experience.

Return Address:

Highway71autoparts

9131 Highway 71 NE
Spicer, MN, 56288