eBay

Turntable Upgrade ? Ortofon 2M Red Cartridge & Stylus + Litz 5N Silver Wired Ebony Wooden Headshell.

Will It Fit My Turntable ? It Will Fit All Turntables That Are S Shaped "Like The US Dollar $"

Turntables have 2 main styles of Tonearm, the S Shaped "As Above" & a Straight "Like Harry Potters Wand"

If You Have Any Questions On Fitting A Certain Model Then Please Send A Message, We Will Answer It ASAP.

Ortofon 2M Red Cartridge Specifications.

Output voltage at 1000 Hz, 5cm/sec	5.5 mV
Channel balance at 1 kHz	1,5 dB
Channel separation at 1 kHz	22 dB
Channel separation at 15 kHz	15 dB
Frequency range at - 3dB	20-22.000 Hz
Frequency response	20-20.000 Hz + 2 / - 1 dB
Compliance, dynamic, lateral	20 µm/mN
Stylus type	Elliptical
Stylus tip radius	r/R 8/18 µm
Tracking force range	1,6-2,0g (16-20 mN)
Tracking force, recommended	1,8 g (18 mN)
Tracking angle	20°
Internal impedance, DC resistance	1,3 kOhm
Internal inductance	700 mH
Recommended load resistance	47 kOhm
Recommended load capacitance	150-300 pF
Cartridge weight	7.2 g

Product Information Below:

The Replacement SME Style H-4 Bayonet Fitting Light Weight Black Ebony Wooden Headshells that we Selling are Precision Manufactured to Very High Standards to ensure that Their Performance Exceeds that of the Original Headshells that they are Replacing.

Detailed Product Information Below.

Light Weight Ebony Wooden Headshell.

Type: SME Type H-4 Bayonet Fitting 4-Point Connector.

The Headshell is Wired with Litz 5N Pure Silver Wiring.

Litz Wiring: 5N Pure Silver Litz Wiring is the Best Wire for Faster Transmission Speeds and Cleaner Sound.

It's 0.55mm Outer Diameter, Litz Construction, 7 Strands and Each Strand is 0.1mm in Diameter, its 99.999 % Pure Soft Annealed Silver Wires in oversized PTFE Teflon Insulation.

Woven Teflon Litz Construction is ideal, it Transmits Electrical Signals faster and with far Less Distortion than Ordinary OFC Wires.

High Grade Teflon Insulation is the best insulator for bare cable.

Wire Length: 2 inches (50mm) Long with Female Connector Sockets on Each End

The Cartridge Connector Terminals are made from High Quality Sn-P Bronze with High Conductivity 24K GOLD Plating.

Each Terminal End is Wrapped in Colour Coded Shrink Tubing. Terminals are Hand Soldered. Colour Coded heat shrink is used at the cartridge end, Black Heat Shrink is Used at the Headshell End.

It is Recommended to Adjust the Tracking Weight on Your Tonearm after Fitting a New Headshell.

If your Tonearm has a Bias Adjustment, Check & Reset that as well.

Below Is A Question & Answer Section, This Will Hopefully Answer Most Customer Questions.

Q: How Long Will I Have To Wait For My Order To Arrive ?

A: We send Most Items On A 48hr Service. Purchases Made On A Thursday Through Sunday Are Sent On The Following Monday (Except On Bank Holiday Mondays)

Q: Do You Provide Tracking Details ?

A: Yes, We Always Upload Full Tracking details To Your PayPal Account Once Your Item Has Been Packed To Ship.

Q: My Tracking Details Do Not Work, Why ?

A: Once Your Order Has Been Collected Your Tracking Details Will Work. Normally After 7pm Onwards On The Day Of Collection From Us.

Q: Can You Send My Order To A Non Registered eBay - PayPal Address ?

A: No, This Is Not Possible. PLEASE DO NOT ASK!

Q: Will You Send By A Cheap Non Signed For Courier ?

A: No, All Items Are Always Send Fully Signed For & Fully Trackable.

Q: Will You Send Overseas ?

A: We Ship To Many Countries Via eBay Global Shipping.

Q: What Are The Costs To Ship To Me Overseas ?

A: eBay Show These Costs At The Point Of Checkout, You Can See Them Before Making A Purchase.

Overseas Shipping Is Available via eBay Global Shipping, If Your Country Is Not Included In Our Global Shipping Shipping Selections It Will Not Be Possible To Ship To Your Country.