Notice:
Please check if your car parts are the same as our pictures.
Due to light and screen differences, the color of the item may be slightly different from the picture.
Please contact us if you have any questions, thank you!
describe:
Applies to: Jeep Wrangler JL 2018-2022
red
Size: 9.5*2.5cm/3.74*0.98inch
Manual measurements may be biased
Material: high quality ABS
Packing list: 2 pieces
100% Brand New High Quality
Give your car a high-fashion style
Installation and introduction:
DIY Project --- Easy to install.
Please clean the installation location with alcohol or detergent (make sure there is no grease, wax or dust etc.)
Before installation, please make sure that the installation position is exactly the same as the chassis, (Note: If there is any problem or inappropriateness, please contact us)
Tear off the strong double-sided tape on the back. If the temperature is relatively low, please heat it with a hairdryer or a lighter.
Paste it according to the comparison, press it for about 1-2 minutes (note: do not wash the car within 24 hours, the adhesive should be fixed after 12 hours)
Installation is complete.
Because the same model of car may be produced differently in different countries. Please make sure your car parts are as shown in our pictures, otherwise they will not fit, if there is any difference, please contact us before buying, thank you!
