Electric slotting machine grey board cardboard automatic slotting and proofing

 

Operation steps:
1. First install the knife tool slot blade, adjust the slotting depth.
2. Connect the round head of the power adapter to the power jack of the machine, then connect the two flat plugs to the 220V power socket, and press the power switch of the machine for about 1 second to enter the man-machine operation interface.
3. Adjust the scale on the side of the machine to reach the margin of the slot you need, put in the material, enter the system to select the slot mode you need, and you can slot.
4. During the operation, if you need to pause, press the emergency stop button.
5. Pay attention to safety when slotting, and do not approach the blade with your hands to prevent scratches.
6. When the machine is finished, turn off the power.