Specifications:
- Voltage: 12 V DC
- Current: 1.5A
- Power Cord Length: 3 m
- Socket Diameter: 1.6 cm
- Lifting Height: 2 m
- Flow Rate: 12-15 L / min
- Speed: 8500 rpm
Package Included:
- 1 x Submersible Pump
- 1 x User Manual
Features:
- Full sealed equipment to prevent leakage and prolong service life, insulation state, low noise and fast speed, small size and light weight, easy to install and carry.
- Stainless steel filter and screw thread connection, easy to disassemble, repair and replace. Suitable for water, diesel fuel, kerosene.
- For combine harvesters, large farm equipment, construction equipment, large tractors and other vehicles that are not easy to refuel.
- The stainless steel housing is more sturdy, not easy to deform, and prevents rust or corrode. A switch is set on the oil pump power line for easy operation.
- The bottom filter is equipped with a threaded interface for easy removal, maintenance and replacement, to achieve the purpose of reuse.
Warm Tips:
- After use, the pump should be taken out of the oil (or water) in time.
- When pumping oil, you should first connect your own oil outlet hose, and then put the entire pump into clean oil (or water).
- Do not pump flammable substances such as gasoline and alcohol! Do not run the pump without load and dry.
- The oil pump should work intermittently (that is, it should be used for no more than 20 minutes at a time, and can be used continuously after stopping for 10-15 minutes). Be careful not to work continuously for a long time.
- Confirm that the power supply voltage is consistent with the voltage marked on the oil pump, and the voltage tolerance is ±5%. Pay attention to the positive and negative poles.
