| Tool Information | ||||
| Manufacturer | GARR | |||
| EDP Number | 50671 | |||
| Type | V4-S - 4 Flute High Performance Variable Helix End Mill - Centre Cutting | |||
| Material Specification | Solid Submicron Grain Carbide with AlCrN Coating | |||
| Application | Recommended for Titanium, Inconel and Stainless Steel (<40Rc) | |||
| Diameter | 16mm | |||
| Overall Length | 100mm | |||
| Flute Length | 48mm | |||
| Corner Radius | - | |||
| Shank Diameter/Type | 16mm - DIN 6535 - Form HA - Plain Cylindrical Shank | |||
| Quantity Supplied | 1 | |||
| Condition | New/Unused/Boxed | |||
| Information | A high performance rougher/finisher for difficult materials with geometry which reduces vibrations for more aggressive machining resulting in less cycle times and greater productivity. Aluminum Chromium-based coatings have excellent wear resistance, thermal shock stability, and hot hardness. Well suited for Titanium, Inconel, and Carbon Fibre. Characteristics • Solid Submicron Grain Carbide • AlCrN Coating • Centre Cutting • Minimizes Burr on Parts • Variable Rake Aids in Chip Formation • Helix Geometry Varies over Length of Flutes • PCT (Polish Carbide Treatment) Enhances Tool Life • Recommended for Titanium, Inconel and Stainless Steel (<40Rc) • Variable Flute Design helps with Chip Evacuation in Slots and Pockets | |||
| DISCLAIMER | ||||
| The technical information provided in this listing is for general guidance only and has been taken from literature provided by manufacturers. Every reasonable care has been taken to ensure this information is accurate and correct and we do not accept any responsibility or liability for errors or omissions or any information that is found to be misleading. For more detailed technical information and to check this information please consult the manufacturers own literature or websites which in general have an extensive array of technical literature available. | ||||