C-Tec XFP510-32 XFP Repeater Panel 32 Zone

The C-Tec XFP510-32 is a 32-zone repeater panel designed to repeat the functions of an XFP Main panel at remote locations, such as fire service entrances or other critical points on a site. This panel offers full access to all functions and controls of the XFP Main panel, including access levels 1, 2, and 3, and includes an onboard fault relay.

The XFP510-32 requires its own dedicated mains power and battery backup supply, and up to eight XFP Repeaters can be connected to a non-networked XFP Main panel. Communication between the XFP Main panel and the repeater is managed through the AFP711 network driver card, which is standard in all XFP510-32 units.

The repeater network must be wired with 1.5mm² two-core screened fire-resistant cable, and the total network length must not exceed 500 meters.

Key Features:

• Can be used to repeat the functions of an XFP Main panel at remote locations such as fire service entrances.

• Offers all of the functions and controls of the XFP Main panel (access levels 1, 2, and 3).

• Includes an on-board fault relay for added reliability.

• Requires its own mains power and battery backup supply.

• A maximum of 8 XFP Repeaters can be connected to a single non-networked XFP Main panel.

• Communication between the Main panel and the Repeater requires the AFP711 network driver card (standard in XFP510-32 units).

• Repeater network is wired in 1.5mm² two-core screened fire-resistant cable. Network length cannot exceed 500 meters.

Protocol/Compatibility:

• Compatible with C-TEC's XFP CAST, Apollo XP95/Discovery, and Hochiki ESP main panels.

Specifications:

• Mains Supply: 230V 50/60Hz.

• Mains Rated Current: 680mA maximum.

• Internal Power Supply: 27V DC nominal.

• Total Output Current: Limited to 3A @ 230Vac (Imax: 250mA; Imin: 70mA).

• Max Battery Size and Type: 2 x 12V 7Ah VRLA batteries connected in series.

• Auxiliary Relays: Fault (Failsafe; capable of switching 1A @ 30V DC; not for switching mains voltages).

• Indicators:

  • 2-line x 40-character backlit display.

  • 32 Zonal LEDs.

  • General Fire, Energized, Pre-Alarm, Remote Output Activated, Remote Output Disabled, Accessed, Disablement, Test, Silenced, General Fault, System Fault.

• Expansion Connections: Onboard AFP711 network driver card for connecting additional XFP Repeaters.

Product Dimensions (mm):

• Panel Size: 410 W x 250 H x 80 D mm (base).

• Flush Mounting Hole Size: 412 W x 255 H x 50 D mm (requires XFP385 bezel).

• Lid Dimensions: 439 W x 274 H x 7 D mm.

Construction & Finish:

• Material: Metal.

• Finish: Textured, RAL7035.

IP Rating: To be confirmed.

Weight: 4.5 kg (without batteries).

Operating Conditions/Temperature:

• Temperature: -5ºC to +40ºC.

• Max Relative Humidity: 95%.

Network Specification:

• Maximum number of Repeaters per Main XFP: 8 (any mix).

• Maximum total length of Repeater network: 500m.

• Cabling Requirements: 1.5mm² two-core screened fire-resistant cable.

• The network is non-redundant.