2007-2010 Outlook BCM 25910474 | Programmed to Your VIN | Body Control Module

2007-2010 Outlook BCM 25910474 | Programmed to Your VIN | Body Control Module
One Year Warranty

Restore Control and End Electrical Frustrations in Your Saturn Outlook

Are you dealing with bizarre electrical issues in your 2007-2010 Saturn Outlook? Maybe the power windows have a mind of their own, the interior lights are flickering, or worse, the security system is preventing your vehicle from starting. These aren’t just annoyances; they’re classic signs of a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, and when it starts to fail, it can create a cascade of confusing and unpredictable problems. This VIN-programmed BCM is the definitive solution, designed to restore full functionality and peace of mind.

From the Diagnostic Bay: The Case of the Haunted SUV

I remember a 2008 Saturn Outlook that came into my shop with a list of complaints that sounded like it was possessed. The owner said the radio would turn on by itself, the door locks would cycle while driving, and sometimes the car just wouldn’t start, leaving the security light blinking on the dash. A quick scan showed a dozen communication codes, primarily a U0140 (Lost Communication With Body Control Module). After verifying the power and grounds to the BCM were solid, it was clear the module itself was internally fried—a common issue I’ve seen in over 500 GM vehicles from this era due to heat cycles and component aging. We replaced it with a VIN-programmed unit just like this one, and it was like an exorcism. All the ghost-like issues vanished instantly. This isn’t just a part; it’s the solution that brings your vehicle back to normal.

Is Your Vehicle Showing These Symptoms?

  • ✔ Power windows, door locks, or mirrors operating erratically or not at all.
  • ✔ Interior or exterior lights flickering, staying on, or not working.
  • ✔ The security system light is on, and the engine won’t crank (anti-theft active).
  • ✔ The key fob is unresponsive or works intermittently.
  • ✔ Multiple warning lights on the dashboard with no obvious cause.
  • ✔ Diagnostic trouble codes (DTCs) related to communication errors, such as U0140, U0155, or B1001.
  • ✔ Wipers or horn activating unexpectedly.

The Smart Solution: VIN-Programmed and Ready to Install

Forget about the time and expense of a dealership visit. We take the hassle out of the repair by programming this module specifically for your vehicle using your VIN. This ensures that all the factory settings and options your Saturn Outlook came with are correctly configured. We load the latest, most stable software from GM, which often corrects bugs present in the original programming. You get a part that’s ready for installation right out of the box, saving you hundreds in programming fees and vehicle downtime.

A Straightforward Guide to Installation

  1. ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
  2. ✔ Locate the BCM: On your 2007-2010 Saturn Outlook, the Body Control Module is typically located in the center dash area. You may need to remove a lower dash panel for access.
  3. ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. Note their orientation. Then, unbolt or unclip the module from its mounting bracket.
  4. ✔ Install the New Module: Mount the new BCM in the same location and securely plug in all the electrical connectors. Ensure they click into place.
  5. ✔ Reconnect Power: Reconnect the negative battery terminal and tighten it securely.
  6. ✔ Final Checks: Start the vehicle and test all body functions—windows, locks, lights, wipers, etc. Note that some post-installation procedures may be required.

Important Post-Installation Information

After installing your new 2007-2010 Outlook BCM, your vehicle may require one or more relearn procedures for full system integration. While many vehicles will operate perfectly, please be aware of the following possibilities:

  • Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the new BCM with the airbag system.
  • Brake Pedal Position Relearn: To ensure proper brake light and traction control operation, a brake pedal position sensor recalibration may be necessary on some models.

Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any step.

Guaranteed Fitment for Your GM Vehicle

This BCM is a direct replacement for part number 25910474 and is compatible with a wide range of GM vehicles. Please verify your part number or consult the list below. This module fits the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.

This part will fit these makes and models with these options:

ACADIA 07-12, AVALANCHE 1500 10, CAPRICE 11-13, CAPTIVA SPORT 12, CTS 08-13, DTS 06-11, ENCLAVE 08-12, EQUINOX 07-09, ESCALADE 10, ESCALADE ESV 10, ESCALADE EXT 10, EXPRESS VANS (1500/2500/3500) 08-12, G8 08-09, HUMMER H2 08-09, IMPALA 06-13, LUCERNE 06-11, MONTE CARLO 06-07, OUTLOOK 07-10, SAVANA VANS (1500/2500/3500) 08-12, SRX 07-09, STS 10, SUBURBAN 1500 10, TAHOE 10, TORRENT 07-09, TRAVERSE 09-12, VUE 08-10, YUKON 10, YUKON XL 1500 10. (Please check the original description for specific options and IDs where applicable).

Frequently Asked Questions

Frequently Asked Questions

What does the Body Control Module (BCM) do?

The BCM is a computer that manages many of your vehicle’s non-engine related functions, such as power windows, locks, lights, security system, wipers, and key fob operation. It acts as a central hub for these systems.

Is this part difficult for a DIYer to install?

For someone with basic mechanical skills, the physical swap is straightforward. The main challenge is accessing the module, which is usually behind a dash panel. The key benefit here is that our pre-programming eliminates the need for special computer tools afterward.

Do I need to send my original BCM back?

No. There is no core charge for this part. You can keep your original module, which can be helpful if you ever need to reference its part number.

What information do you need from me to program it?

After you complete your purchase, we will need your vehicle’s 17-digit Vehicle Identification Number (VIN). This allows us to program the BCM with the exact software and settings for your specific vehicle.

What happens if my airbag light comes on after installation?

This is an infrequent but possible occurrence. It means the new BCM needs to be electronically ‘introduced’ to the airbag system (SDM). This requires a ‘Setup SDM Primary Key’ procedure, which can be done by a repair shop with a professional-grade diagnostic tool.

Product Details

Category: GM

eBay Item ID: 205374205752

To program your module, we require your full 17-digit VIN. Please enter it in the payment notes and save to ensure we receive it. Orders without a VIN within our 2-business-day handling period may be canceled, as programming cannot proceed without it.

Shipping

  • Processing Time:
    Reliably shipped within 2-3 business days.

Warranty

Enjoy peace of mind with a one-year replacement warranty on this part, effective from the date you receive it. Labor costs are not covered.

If the part fails within the warranty period, we’ll replace it with a comparable unit or refund your purchase price, ensuring a hassle-free experience.

Return Address:

Highway71autoparts

9131 Highway 71 NE
Spicer, MN, 56288