If you are in any doubt to the compatibility, please contact me but hopefully should be obvious from the photos.  I am not allowed to say the name of the retailer as I get told off by Ebay.

Although the hose reel comes with a wall bracket, it is quite flimsy, and is not possible to order spares (that I am aware of), or to supply an additional item if you want to mount the hose in multiple locations.

In my own case, I wanted to be able to move the hose between front and rear gardens without going to the expense of buying an additional hose.  As the hose system only weighs a few Kg's, it is easy to take off one mount and put it into the other position.

This is a 3d printed replica of the original item - except it is miles stronger (you will notice the weight difference).  It functions the same as the original item, meaning you can easily remove the hose, and use the built in storage nozzle to park the end of the hose.

These are made from ABS plastic and by default come in black.  I can make them in different colours if you wish, but please contact me first if this is a requirement so I can check availability and cost of filament.  Normally, I would not expect alternative colours to cost more.  ABS plastic is very suitable for outside use, and many garden / automotive plastics are made from this material.  It has good UV performance (so will not quickly fade in colour), will withstand a large temperature variation, and is very resistant to oils / chemicals.

Fixings are not provided, and you will need 4 off 6.3mm self tapping button heads x 60mm (these are the same as supplied as with the hoze when you buy it)

I make these to order, and each item takes around 14 hours to make, so there may be a short delay between ordering and despatch.