• Vehicle Information:
  •  
  •  
  • 2005 Toyota Tacoma 4.0L 2005-2007 Lexus LX470 4.7L 2005-2007 Toyota Land Cruiser 4.7L 2005-2009 Toyota 4Runner 4.7L 2005-2009 Toyota Tundra 4.7L 2005-2014 Toyota Tacoma 2.7L 2006-2009 Lexus GX470 4.7L 2006-2009 Toyota Sequoia 4.7L 2007-2014 Toyota Tundra 5.7L 2008-2014 Lexus LX570 5.7L 2008-2014 Toyota Land Cruiser 5.7L 2008-2014 Toyota Sequoia 5.7L 2010 Toyota 4Runner 2.7L 2010-2012 Toyota Sequoia 4.6L 2010-2014 Lexus GX460 4.6L 2010-2014 Toyota Tundra 4.6LKit Includes:
  •  
  •  
  •  
  • 1x Mass Air Flow Sensor/Meter
  •  
  •  
  •  
  • For Lexus GX470 GX460 LX Toyota Sequoia Mass Air Flow Sensor Meter MAF 2008-2010

    Vehicle Information:

     

     

    2005 Toyota Tacoma 4.0L
    2005-2007 Lexus LX470 4.7L
    2005-2007 Toyota Land Cruiser 4.7L
    2005-2009 Toyota 4Runner 4.7L
    2005-2009 Toyota Tundra 4.7L
    2005-2014 Toyota Tacoma 2.7L
    2006-2009 Lexus GX470 4.7L
    2006-2009 Toyota Sequoia 4.7L
    2007-2014 Toyota Tundra 5.7L
    2008-2014 Lexus LX570 5.7L
    2008-2014 Toyota Land Cruiser 5.7L
    2008-2014 Toyota Sequoia 5.7L
    2010 Toyota 4Runner 2.7L
    2010-2012 Toyota Sequoia 4.6L
    2010-2014 Lexus GX460 4.6L
    2010-2014 Toyota Tundra 4.6L

    Kit Includes:

     

     

     

    1x Mass Air Flow Sensor/Meter

     

     

     

    NoteTo confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the notes section in the compatibility chart for additional specifications about this part.

     

     

    Specification:


    *The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire.

    *The PCM uses this signal primarily for fuel control.

    *The Mass Air Flow sensor is located in the intake ducting after the air filter.

     

    INSTALLING:the replacement MASS AIR FLOW SENSOR(MAF):
    *. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    *. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    *. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    *. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    *. CAREFULLY plug the harness connector lead into the MAF sensor.

     

     


    Item Specifics
    Manufacturer Part Number C11408001APS
    Interchange Part Number AFH70M-47A, MAF0035A, 7450056A
    Reference Part Number 22204-0F030A, 22204-75030A, 22204-0F030XA
    Superseded Part Number MF21083A, SU7810A, 5S6299A
    Brand CLASSIC AutoParts
    Manufacturer Warranty 10 Years
    Type Mass Airflow Sensor (MAF Mass Air Flow Sensor/Meter)
    Placement on Vehicle Front
    Color Black
    Numbers of Pin 5
    OE Spec or Performance/Custom OE Spec
    w/ housing No
    Replace Direct Replacement

    Payment
    1. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    2.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
    Shipping
    1.All the orders are shipped from USA warehouse.
     
    2.Orders processed within 24 hours of payment verification.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    Contact Us

    If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

    Feedback

      We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us feedback, so that we can satisfactorily address your concerns.

    Fast and Free
    Best seller
    For Lexus GX470 GX460 LX Toyota Sequoia Mass Air Flow Sensor Meter MAF 2008-2010

    Vehicle Information:

     

     

    2005 Toyota Tacoma 4.0L
    2005-2007 Lexus LX470 4.7L
    2005-2007 Toyota Land Cruiser 4.7L
    2005-2009 Toyota 4Runner 4.7L
    2005-2009 Toyota Tundra 4.7L
    2005-2014 Toyota Tacoma 2.7L
    2006-2009 Lexus GX470 4.7L
    2006-2009 Toyota Sequoia 4.7L
    2007-2014 Toyota Tundra 5.7L
    2008-2014 Lexus LX570 5.7L
    2008-2014 Toyota Land Cruiser 5.7L
    2008-2014 Toyota Sequoia 5.7L
    2010 Toyota 4Runner 2.7L
    2010-2012 Toyota Sequoia 4.6L
    2010-2014 Lexus GX460 4.6L
    2010-2014 Toyota Tundra 4.6L

    Kit Includes:

     

     

     

    1x Mass Air Flow Sensor/Meter

     

     

     

    NoteTo confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table. Also review the notes section in the compatibility chart for additional specifications about this part.

     

     

    Specification:


    *The Mass Air Flow (MAF) sensor measures the amount of air flow entering the intake manifold using a heated grid or wire.

    *The PCM uses this signal primarily for fuel control.

    *The Mass Air Flow sensor is located in the intake ducting after the air filter.

     

    INSTALLING:the replacement MASS AIR FLOW SENSOR(MAF):
    *. Position MAF sensor in the vehicle. Make sure the airflow direction indicated on the sensor is toward the engine.
    *. Install sensor to air duct seal(s), if so equipped, on the replacement MAF sensor.
    *. Connect the MAF sensor to the throttle body air cleaner ducts. If the sensor mounts directly on the throttle body, install and tighten the mounting screws to 10 ft-lb. DO NOT OVERTIGHTEN!
    *. Position clamps over the air duct/MAF sensor connections and tighten. Replace the clamps if necessary. (NOTE: For the MAF sensor to work properly, the sensor/air duct connections must be airtight.)
    *. CAREFULLY plug the harness connector lead into the MAF sensor.

     

     



    1. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.
     
    2.if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.
    1.All the orders are shipped from USA warehouse.
     
    2.Orders processed within 24 hours of payment verification.
     
    3. The images shown are not the actual item and are for your reference only.
     
    4.If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    We stand behind every product we sell.

    All of our brand new items come with a 30-Day money-back or exchange guarantee.

    If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

      We maintain high standards of excellence and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us feedback, so that we can satisfactorily address your concerns.


    All rights reserved.