Fitment system may not be 100% accurate, if you are not sure which bulb size you need, please check vehicle manual or stock bulb model.
Features:
-H11/H8/H9 (High Beam) + H8/H9/H11(Low Beam)
LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
-Especially designed for upgrading the Headlight,Fog light,Daytime Running Light
-Use COB Led technoloty, amazing super bright lighting
-LED Type: Cob LED chip high power
-Application: Headlight / Fog Driving Light / Daytime Running Light
-Beam Type: High Beam / Low Beam / 360°Beam Angle
-Color Temperature: 6000K White
-Working Voltage: DC 12V to 24V
-No delay to light up, Faster on/off response time
-Lifespan: 50,000 working hours ,Adopt imported chips, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
Package Includes:
4pcs H11/H8/H9 LED Headlight Bulbs
New and old packaging will be shipped randomly
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the
bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the en of the bulb does not come in contact with the interior
-H11/H8/H9 (High Beam) + H8/H9/H11(Low Beam)
LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
-Especially designed for upgrading the Headlight,Fog light,Daytime Running Light
-Use COB Led technoloty, amazing super bright lighting
-LED Type: Cob LED chip high power
-Application: Headlight / Fog Driving Light / Daytime Running Light
-Beam Type: High Beam / Low Beam / 360°Beam Angle
-Color Temperature: 6000K White
-Working Voltage: DC 12V to 24V
-No delay to light up, Faster on/off response time
-Lifespan: 50,000 working hours ,Adopt imported chips, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is as the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
Package Includes:
4pcs H11/H8/H9 LED Headlight Bulbs
New and old packaging will be shipped randomly
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the
bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the en of the bulb does not come in contact with the interior
WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
- if your light turns on, please proceed to install both bulbs onto your vehicle.
- if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.