Happydeal_auto
Your best choice
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Description:
New CV Axle Assemblies
ISO / IATF 16949 certified, direct fit and made from high quality materials to meet orginal specifications
Built to last - temperature and pressure resistant grease prevents friction and wear
Premium quality neoprene boots with secure clamps prevent grease leakage and premature boot failure
When replacing CV Axles in pairs, complete the installation on one side before removing the axle from the other side,
otherwise the differential gears may become misaligned which requires the transaxle to be taken apart so the gears
can be reassembled.
Axles should always be replaced in pairs (Passenger and Driver).
This reduces the overall time required to replace two axles at different times.
Part Number:
DSK1161PR 66-4250 66-4251 60-4250 60-4251 60-4260 HO-8243
66-4266 HO-8422, 60-4266 HO-9529 HO-8242 HO-8421 HO-9530
HO-8235 HO-9520 HO-8247
Compatibility Chart:
Make Model Year Notes Position
Acura TSX 2009 All Trim Levels Front
Acura TSX 2010 - 2012 2.4L Front
Acura TSX 2013 2.4L | Automatic Transmission Front
Honda Accord 2008 - 2012 2.4L Front
Honda Accord 2013 - 2014 2.4L | Manual Transmission Front
Honda Civic 2014 EX | 1.8L | Manual Transmission Front
STEP-BY-STEP GUIDE ON HOW TO REPLACE CV JOINTS：
Prioritise safety precautions by parking the vehicle on a level surface, engaging the parking brake and wearing appropriate safety gear. This includes gloves and safety glasses. Safety should be a top priority throughout the entire process.
Utilise the hydraulic jack to lift the front or rear of the vehicle, depending on the axle you’re replacing. Once lifted, secure the vehicle on jack stands to provide a stable working environment.
Use the lug wrench to remove the wheel on the side where you’ll be replacing the CV joint and axle.
Start by removing the cotter pin from the castle nut on the ball joint. Proceed to loosen and remove the castle nut. Use a pry bar to carefully separate the ball joint from the steering knuckle. Also, check the signs of bad ball joints when disconnecting suspension components.
Remove the calliper bolts and hang the calliper out of the way. If necessary, detach the ABS sensor or brake line, ensuring that brake components are appropriately handled during the process.
Locate and remove the axle nut using the appropriate socket. This is a crucial step in releasing the CV joint and axle from the wheel hub.
Using a pry bar, gently release the CV joint from the car’s transmission or differential. Pull the axle out from the wheel hub, carefully navigating through any obstacles in its path.
Insert the new axle into the wheel hub assembly, securing it properly. Pay attention to aligning the splines and push the axle into the transmission or differential, ensuring a snug fit.
Reattach the ball joint to the steering knuckle and tighten the castle nut.Install a new cotter pin.Reconnect the calliper, ABS sensor and any other components you detached.Tighten the axle nut to the manufacturer’s specifications.Put the wheel back on and lower the vehicle.
CAN I REPLACE THE CV AXLES BY MYSELF?
Yes, it’s possible to replace CV axles yourself if you have the necessary tools and skills. For that, you need to follow proper safety precautions.
HOW LONG DOES IT TAKE TO REPLACE CV AXLES?
Replacing a single CV axle typically takes about 1.5 to 3 hours. If you’re replacing all four axles, it can take up to 12 hours, factoring in both parts and labour costs. However, replacing only one axle is usually sufficient if needed.In most cases, however, detecting a split boot before joint damage occurs is difficult, necessitating a complete CV joint replacement.
Package Included:
2X Front CV Axle Shaft
What is an axle housing?
The axle housings serve as mounting points for the front and rear axles and contain the bearing assemblies that support the axles.
| Item Specifics | |
|---|---|
| Cotter Pin Included | No |
| Brand | Carbole |
| Placement on Vehicle | Front, Left, Right |
| Axle Nut Locking Type | Open Groove |
| Axle Nut Hex Size | 1.42 in / 36 mm |
| OE/OEM Part Number | DSK1161PR |
| Manufacturer Warranty | Lifetime |
| Axle Boot Material | Neoprene |
| Axle Nut Thread Size | M26 x 1.5 |
| Fitment Type | Direct Replacement |
| Grease Type | Molybdenum Disulfide Lithium Grease |
| Output Shaft Connection Style | Spline |
| Input Shaft Connection Style | Spline |
| Drive Type | FWD |
| Transmission Type | Automatic |
| Interchange Part Number2 | 66-4250 66-4251 60-4250 60-4251 60-4260 HO-8243 |
| Interchange Part Number3 | 66-4266 HO-8422, 60-4266 HO-9529 |
| Interchange Part Number4 | HO-8242 HO-8421 HO-9530 HO-8235 HO-9520 HO-8247 |
| Year | 2008 2009 2010, 2011 2012 2013 2014 |
| Fitment 1 | 2009 Acura TSX All Trim Levels |
| Fitment 2 | 2010 - 2012 Acura TSX 2.4L |
| Fitment 3 | 2013 Acura TSX 2.4L Automatic |
| Fitment 4 | 2008 - 2012 Honda Accord 2.4L |
| Fitment 5 | 2013 - 2014 Honda Accord 2.4L Manual |
| Fitment 6 | 2014 Honda Civic EX 1.8L Manual |
| Hardware Included | No |
| Number of Outboard Splines | 30 Teeth |
| Shaft Material | 40CR |
| fit car | Honda |
| fit model | Accord |
Payment: We accept Credit card, Debit card, Apple Pay, Google Pay and PayPal.
*Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10).
*Most of the items come with a 30-day warranty covering manufacturing defect. High value products would get a longer warranty, some of them up to 2 year or 5 years or lifetime warranty, excluding any damage by the user
Note: Some address is far from our warehouse so it may need a little more time and may need to pay extra remote shipping fee,we really appreciated you can understand.
-We ship 99.9% of packages the same day if ordered before 12 PM.
Pls don't worry, if the parcel lost, we will resend or refund.
All of our items come with a 30-day return policy.
We ensure all our items are new and in excellent condition prior to shipping.
In the event that you receive the item that is not to the standards above, please contact us via eBay messages.
All returns should be shipped with delivery confirmation. Unauthorized returns will not be accepted.
If you need to return, please double check to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Our coils only with high quality materials to ensure the performance and durability, having 15% more energy than OE coils.
1) Plastic GE Valox resin, professional high voltage di-electric resistant resin.
2) Enable to Keep Releasing energy over 6000 RPM.
3) Ignition Coil Born For Racing
4) Please feel free to contact if you have any problem, we’ll reply ASAP.
5) We greatly appreciate your Five Stars Positiv5 feedback. It means a lot to us. Thanks for your support.
If after 2 Business Days of no response, we will cancel your order.
Tracking Number If your Tracking Number is not showing any movement, we want to let you know that sometimes they just don't scan all the packages along the way. We encourage you to inform us of any issues, inquiries, or shipping problems before leaving negative feedback, a low rating, and/or opening any cases for dispute per our honest, hard-working, small business. We appreciate your business and look forward to serving you in the future. If your parcel has not arrived by the estimated delivery date, and there is no movement per your Tracking Number, please contact us. We will do everything in our power to see that you get your item.
Happydeal_auto
Your best choice
Shop Category Hot Item
Picture
New List Item
Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
2PCS Front CV Axle Shaft for Acura TSX (2008-2014) Honda Accord 2014 Civic 2.4L
Description: New CV Axle Assemblies ISO / IATF 16949 certified, direct fit and made from high quality materials to meet orginal specifications Built to last - temperature and pressure resistant grease prevents friction and wear Premium quality neoprene boots with secure clamps prevent grease leakage and premature boot failure When replacing CV Axles in pairs, complete the installation on one side before removing the axle from the other side, otherwise the differential gears may become misaligned which requires the transaxle to be taken apart so the gears can be reassembled.
Axles should always be replaced in pairs (Passenger and Driver). This reduces the overall time required to replace two axles at different times.
Part Number: DSK1161PR 66-4250 66-4251 60-4250 60-4251 60-4260 HO-8243 66-4266 HO-8422, 60-4266 HO-9529 HO-8242 HO-8421 HO-9530 HO-8235 HO-9520 HO-8247
Compatibility Chart: Make Model Year Notes Position Acura TSX 2009 All Trim Levels Front Acura TSX 2010 - 2012 2.4L Front Acura TSX 2013 2.4L | Automatic Transmission Front Honda Accord 2008 - 2012 2.4L Front Honda Accord 2013 - 2014 2.4L | Manual Transmission Front Honda Civic 2014 EX | 1.8L | Manual Transmission Front
STEP-BY-STEP GUIDE ON HOW TO REPLACE CV JOINTS： Prioritise safety precautions by parking the vehicle on a level surface, engaging the parking brake and wearing appropriate safety gear. This includes gloves and safety glasses. Safety should be a top priority throughout the entire process. Utilise the hydraulic jack to lift the front or rear of the vehicle, depending on the axle you’re replacing. Once lifted, secure the vehicle on jack stands to provide a stable working environment. Use the lug wrench to remove the wheel on the side where you’ll be replacing the CV joint and axle. Start by removing the cotter pin from the castle nut on the ball joint. Proceed to loosen and remove the castle nut. Use a pry bar to carefully separate the ball joint from the steering knuckle. Also, check the signs of bad ball joints when disconnecting suspension components. Remove the calliper bolts and hang the calliper out of the way. If necessary, detach the ABS sensor or brake line, ensuring that brake components are appropriately handled during the process. Locate and remove the axle nut using the appropriate socket. This is a crucial step in releasing the CV joint and axle from the wheel hub. Using a pry bar, gently release the CV joint from the car’s transmission or differential. Pull the axle out from the wheel hub, carefully navigating through any obstacles in its path. Insert the new axle into the wheel hub assembly, securing it properly. Pay attention to aligning the splines and push the axle into the transmission or differential, ensuring a snug fit. Reattach the ball joint to the steering knuckle and tighten the castle nut.Install a new cotter pin.Reconnect the calliper, ABS sensor and any other components you detached.Tighten the axle nut to the manufacturer’s specifications.Put the wheel back on and lower the vehicle. CAN I REPLACE THE CV AXLES BY MYSELF? Yes, it’s possible to replace CV axles yourself if you have the necessary tools and skills. For that, you need to follow proper safety precautions. HOW LONG DOES IT TAKE TO REPLACE CV AXLES? Replacing a single CV axle typically takes about 1.5 to 3 hours. If you’re replacing all four axles, it can take up to 12 hours, factoring in both parts and labour costs. However, replacing only one axle is usually sufficient if needed.In most cases, however, detecting a split boot before joint damage occurs is difficult, necessitating a complete CV joint replacement.
Package Included: 2X Front CV Axle Shaft What is an axle housing? The axle housings serve as mounting points for the front and rear axles and contain the bearing assemblies that support the axles.
Payment
Payment: We accept Credit card, Debit card, Apple Pay, Google Pay and PayPal. *Additional shipping fee may be charged for buyers from Puerto Rico, Hawaii, Alaska, Guam, and the U.S. military address of the United States or other remote area (zone 8-10). *Most of the items come with a 30-day warranty covering manufacturing defect. High value products would get a longer warranty, some of them up to 2 year or 5 years or lifetime warranty, excluding any damage by the user Shipping
Note: Some address is far from our warehouse so it may need a little more time and may need to pay extra remote shipping fee,we really appreciated you can understand. -We ship 99.9% of packages the same day if ordered before 12 PM. Pls don't worry, if the parcel lost, we will resend or refund. Returns
All of our items come with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In the event that you receive the item that is not to the standards above, please contact us via eBay messages. All returns should be shipped with delivery confirmation. Unauthorized returns will not be accepted. If you need to return, please double check to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Contact Us
Our coils only with high quality materials to ensure the performance and durability, having 15% more energy than OE coils. 1) Plastic GE Valox resin, professional high voltage di-electric resistant resin. 2) Enable to Keep Releasing energy over 6000 RPM. 3) Ignition Coil Born For Racing 4) Please feel free to contact if you have any problem, we’ll reply ASAP. 5) We greatly appreciate your Five Stars Positiv5 feedback. It means a lot to us. Thanks for your support. If after 2 Business Days of no response, we will cancel your order. All rights reserved. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
