The CiT F3M is a Micro-ATX designed
with a concentrated focus on increased airflow throughout the chassis,
it comes equipped with a stylish mesh front panel allows for large
volumes of air to pass through unrestricted, paired with a tempered
glass side panel. The perfect blend of aesthetic and visual appeal
while occupying minimal desk space with its smaller footprint.
To enhance the airflow even further behind the mesh the case features
two pre-installed air intake fans, maximising it's potential and with
the possibility to mount additional fans and radiators, this is a high
quality Micro-ATX where not an inch of space goes to waste.
Three 120mm ARGB fans catch the eye with stunning colour modes on offer
at the touch of a button not only make the F3 stand out but ensures all
important components are catered for when it comes to keeping
temperatures balanced and conditions optimised for a peak performance.
Moving onto the front panel towards the bottom of the case is the I/O
panel providing USB2.0 and USB3.0 connections and inside the F3 the
included ARGB fans have approximately 15 LED modes available or have
access to 16.8 million colours using a compatible addressable RGB
Motherboard. A tempered glass panel showcases your build setup.
Measuring 387 centimetres in height, the interior painted in all black
with a full PSU shroud that adds to the sleek and unobtrusive look.
Space to install a Micro-ATX or Mini-ITX motherboard and for a small
surface area there is still has plenty of space to install powerful
hardware. It can fit a graphics card up to 28.5 centimetres in length
and within the PSU shroud users will find space for two hard drives.
Within the PSU shroud an ATX power supply unit will fit measuring up to
150mm.
The F3 is a small stylish Micro that delivers outstanding airflow but
also is superb at displaying the ARGB lighting. Overall the F3 has
ample airflow while keeping a smooth aesthetic.
Key Features
Mesh Micro-ATX Gaming Case - The CiT F3 provides massive airflow from
all sides of the case that make it an exceptional case for maintaining
optimum temperatures. The main source of air is through the stylish
mesh front panel allows large volumes of air to flow into the case
easily without obstruction. Cool air is always on hand to cool your
most important components.
Even More Airflow - To enhance airflow even further the case features
three pre-installed fans, two pre-installed behind the mesh front
panel. Alongside the three pre-installed fans there is one more
position available for 120mm fans to be fitted on the top. Another
option the F3 can support a 240mm radiator at the top of the chassis
crafting a highly efficient thermal solution.
Stylish Make-Up - Featuring a modern silky design that draws the eye to
the important stuff. The front mesh panel not only provides superb
airflow but also accommodates the ARGB lighting. Finished off with a
tempered glass side panel it is perfect for showcasing the high-end
components of your gaming PC.
Motherboard Software - The ARGB lighting effects can be synced through
the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB
header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0
& ASRock. Customise the look with endless possibilities with 16.7
million static modes and 12 pre-set lighting effects.
Daisy Chain Set Up - Delivering great cooling without complex
connections and a hub, a daisy chain set up lets you power all
pre-installed fans through a single connector and flick between 15
colour modes & link additional fans. Saving space and cutting down
on the cable management.
Micro-ATX Housing - The F3 can accommodate Micro-ATX, & Mini-ITX
motherboards; Supports GPU cards up to 285mm in length, air coolers up
to 160mm in height, and Standard ATX PSUs up to 150mm in length.
Clean Interior - To keep the interior looking clean there is a full PSU
shroud capable of holding ATX power supplies and for storage there is
space within the shroud to fit a single SSD and HDD or two SSDs or HDDs.
Two Colours - Build a sleek PC with the F3 available in classic black
or pure white, pick a colour that suits your style.
Specifications
Chassis Dimensions (Excluding Fascia / Panels): (W) 199 x (H) 390 x (D)
311mm
Water Cooling Support:
Front Supported Radiator(s): 120mm
Top Supported Radiator(s): 120mm and 240mm
Rear Supported Radiator(s): 120mm
3 x ARGB Fans Included:
Front Fan Powered Via: Slave Fan - 4pin Proprietary
Front Fan LEDs Powered Via: Slave Fan - 4pin Proprietary
Rear Fan Powered Via: Master Fan - SATA
Rear Fan LEDs Powered Via: Master Fan - SATA
Fan Controller Power Via: LED Button (Reset Switch) / MB Sync
General Specifications:
Max. Motherboard Size: (W) 244 x (D) 244mm
PSU Max. Length (mm): 150mm
HD Audio Ports: Combined Headphone / Mic
Case Specifications
Form Factor: Micro ATX
Motherboard Support: Micro ATX, Mini ITX
PSU Support: Standard ATX
PSU Location: Bottom
Gaming Case: Yes
Water Cooling: Water Cooling Ready!
Supported Radiator Size: 240mm
Supported Radiator Positions: Top
Body Material: 0.4mmSPCC
Front Bezel Material: ABS & Metal Mesh
Side Panel: Tempered Glass
Internal Cable Management Depth: 23mm
External Bays:
Internal Bays: 2 x 3.5” Internal
2 x 2.5” Internal
Drive Bay Notes: 2 x 2.5" shared with 2 x 3.5"
Expansion Slots: 4 x Full Size
Cooling Front: Space For 2 x 120mm Fans (2 x 120mm ARGB Fans Included)
Cooling Top: Space For 2 x 120mm Fans
Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm ARGB Fan Included)
Cooling Side: None
Cooling Bottom: None
Fan Controllers: 0 Fan Controllers, controlling up to
0 fans in total
IO Ports: 1 x USB 3.0
1 x USB 2.0
GPU Max Length: 285mm
CPU Cooler Maximum Height: 160mm
Front Bezel Colour: Black / Mesh
Body Colour: Black
System Cabinet Features:
PSU Included: No