Feature:
1. Basic Parameters: This black splicer has a mode with a maximum of 128 groups, a core adjustment method for cladding alignment with loss estimation, and a heating time of 18 seconds.
2. Automatic Discharge Calibration: Our splicer has an automatic discharge calibration function, which can be automatically corrected according to changes in ambient temperature and air pressure.
3. Sturdy and Practical: This splicer is made of ABS material, superb craftsmanship, sturdy and practical, and can be suitable for a long term under the correct .
4. Simple : The optical fiber splicer is lightweight and portable, with fast splicing speed, simple .
5. Security in Usage: Enhances security in usage, can withstand greater work strength, improves performance, allows for an enhanced experience in usage.
Specification:
Item Type: Fiber Optic Splicer
Material: ABS
Color: Black
Core Adjustment: Cladding Alignment
Applicable Fiber Type: SM(ITU-T G.652 and G.657), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655)
Fiber Type: 0.25-3.0 mm or Leather Cable
Fiber Clamp: Replaceable Universal Clamp, SOC Clamp
Cladding Diameter: 80-150μm,
Coating Diameter: 100-1000μm
Cutting Length: 8-16 mm
Fusing Mode: Maximum 128 groups
Fusing loss:
SM: 0.03dB
MM: 0.01dB
DS: 0.04dB
NZDS: 0.04dB
G.657: 0.03dB
Return Loss: >>60dB
Fusing Time: 8 seconds (SM G652 Quick mode)
Loss Estimation: Yes
Heating Time: 18 seconds (SM G652 250μm 40mm heat-shrinkable tube in Quick mode) User adjustable
Applicable Heat Shrink Length: Approx. 20mm/0.8in, 30mm/1.2in, 40mm/1.6in, 50mm/2.0in, 60mm/2.4in
Heating Mode: Maximum 32 groups
Battery: With built-in battery x 1, matching battery x 1 (with matching battery)
Capacity: 5200mAh, each charge supports about 300 times and heating (single battery capacity)
Electrode Life: about 5000 times discharge
Automatic Start: Fusing or heating
Automatic Discharge Calibration: Automatic calibration according to ambient temperature and air pressure changes
Result Storage: 10,000 sets of welding data or 2,000 sets of welding images
Tensile Force Test: 1.96-2.25N
Operating Conditions: 0-5,000m above sea level
Relative Humidity: 0-95%, -20-50°C
Maximum Wind Speed: 15m/s
Storage Conditions: Relative Humidity 0-95% , -20-60°C Temperature
Display: 3.5 inch HD LCD display
Magnification and Display: X, Y, XY, X/Y, 20x magnification
Port: USB2.0
Package List:
1 x Splicer
1 x Fiber Optic Cutter Set(Fiber Optic Cutter, Aligner, 2pcs Hex Wrenches, Storage Case)
1 x Leather Cable Stripping Plier
1 x Fiber Optic Stripping Plier
1 x Alcohol Bottle
1 x Lithium Battery
100 x Heat Shrink Tubing
2 x Electrode Rods
2 x Electrode Rod Sleeve
1 x Charger
1 x AC Adapter
1 x Cleaning Sheet
1 x Back Strap
1 x Instruction Manual
1 x Carrying Storage Box
Note:
1. Using standard optical fibers, the results obtained from the test according to the standard cutoff methods of ITU T and IEC, the loss will be changed by the environment and the characteristics of the fiber.
2. The results obtained from measurements at room temperature are largely influenced by the state of use of the cell and the operating environment.
3. The life of the electrode rod may vary depending on the environment, fiber type and mode.
4. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
1. Our listing price includes the value of goods,packaging cost,and export taxes,not including international duties.
2. duties,taxes,and charges are not included in the item price or shipping fee.
3. The duties are buyers' responsibility.Please check with your country's customs office determine what these additional costs will be prior to your purchase.
4. All disputes arising from the duties will be submitted to ebay for solution.
