Specifications:
• Bulb Socket: 9005/HB3 + 9006/HB4
• 9005 Wattage: 100W
• 9006 Wattage: 80W
• Color Temperature: 4200K
• Voltage(V): DC 12V
• Working temperature: -40℃~+80℃
• Beam Angle: 360°
• Waterproof Level: IP68
• Material: Aviation Aluminium
• Super Long Service Life: ≥800 Hours
• Warranty:5 Years
• Canbus Error Free: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor to avoid hyper flash or fast blinking.
• Please Note: Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.
Package Included:
2Pcs 9005 Halogen Headlight High Beam Bulbs
2Pcs 9006 Halogen Headlight Low Beam Bulbs
(New and old packaging will be shipped randomly)
Note:
Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
For most cars, just Plug-n-Play,no ballast required. Yet for some European vehicles or new vehicles, load resistors maybe required to avoid the error code or blinking.
When installing this bulb, please make sure to turn the car off, and key out.
bulbs are very easy to install. You just have to plug it in the socket. ( bulb has + AND -terminal. If it doesn't light up after inserting into the socket, all you need to do is insert it oppositely.)
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the
bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior
Specifications:
• Bulb Socket: 9005/HB3 + 9006/HB4
• 9005 Wattage: 100W
• 9006 Wattage: 80W
• Color Temperature: 4200K
• Voltage(V): DC 12V
• Working temperature: -40℃~+80℃
• Beam Angle: 360°
• Waterproof Level: IP68
• Material: Aviation Aluminium
• Super Long Service Life: ≥800 Hours
• Warranty:5 Years
• Canbus Error Free: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor to avoid hyper flash or fast blinking.
• Please Note: Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.
Package Included:
2Pcs 9005 Halogen Headlight High Beam Bulbs
2Pcs 9006 Halogen Headlight Low Beam Bulbs
(New and old packaging will be shipped randomly)
Note:
Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
For most cars, just Plug-n-Play,no ballast required. Yet for some European vehicles or new vehicles, load resistors maybe required to avoid the error code or blinking.
When installing this bulb, please make sure to turn the car off, and key out.
bulbs are very easy to install. You just have to plug it in the socket. ( bulb has + AND -terminal. If it doesn't light up after inserting into the socket, all you need to do is insert it oppositely.)
Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly
before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the
bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty
connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior