DC 12-24V Car Refrigeration Air Compressor Fridge Freezer+Temperature Controller
Description
Compressor parameters:
Compressor model: BD25H
Rated voltage frequency: 12-24V (DC)
Working Back Pressure: Low Back Pressure (L.B.P)
Cooling status: natural cooling / air-cooled
Throttling device: capillary tube
Motor type: BLDC
Ambient temperature : 0～43℃
Evaporating temperature : -35～-10℃
Operating voltage range : 9.6～17/21.3～31.5V
Max. exhaust pressure : 1.86 MPa(abs)
Max. condensing temperature : 65℃
Max. winding temperature : 130℃
Max. case temperature : 95℃
Max. exhaust temperature : 120℃
Starting performance : 12/24V [0.5/0.5MPa(abs)
Minimum case pressure: 35 bar
Oil type: Ester oil
Oil filling volume : 150ml±10ml
Diameter of suction pipe (inner diameter) : Φ6.2±0.1 mm
Exhaust pipe diameter (inner diameter) : Φ5.0±0.1 mm
Process pipe diameter (inner diameter): Φ6.2±0.1 mm
Compressor noise : ≤40dB(A)
Vibration : 0.6m/s²。
Working volume:2.5cm³
Cooling Capacity:
RPM is 2000, cooling capacity is 45W , 38.7 Kcal/h ,153.5 btu/h,Efficiency COP is 1.25 w/w,electric current is 2.9/1.4，input Power is 36W
RPM is 2500, cooling capacity is 55W , 47.3 Kcal/h ,187.7 btu/h,Efficiency COP is 1.25 w/w,electric current is 3.5/1.7,input Power is 44W
RPM is 3000, cooling capacity is 64W , 55 Kcal/h ,218.4 btu/h,Efficiency COP is 1.25 w/w,electric current is 4.1/2.0, input Power is 51W
RPM is 3500, cooling capacity is 74W , 63.6 Kcal/h ,252.5 btu/h,Efficiency COP is 1.25 w/w,electric current is 4.9/2.4, input Power is 59W
Digital Thermostat Parameters:
Voltage range: DC 12-24V, limit 35V
Operating current: 0.1A
Door Lamp Function: Door lamp voltage follows input voltage
Temperature probe accuracy: ±1℃
Operating ambient temperature: -10℃～60℃, relative humidity 20%～90%
Compressor model: BD25H
Rated voltage frequency: 12-24V (DC)
Working Back Pressure: Low Back Pressure (L.B.P)
Cooling status: natural cooling / air-cooled
Throttling device: capillary tube
Motor type: BLDC
Ambient temperature : 0～43℃
Evaporating temperature : -35～-10℃
Operating voltage range : 9.6～17/21.3～31.5V
Max. exhaust pressure : 1.86 MPa(abs)
Max. condensing temperature : 65℃
Max. winding temperature : 130℃
Max. case temperature : 95℃
Max. exhaust temperature : 120℃
Starting performance : 12/24V [0.5/0.5MPa(abs)
Minimum case pressure: 35 bar
Oil type: Ester oil
Oil filling volume : 150ml±10ml
Diameter of suction pipe (inner diameter) : Φ6.2±0.1 mm
Exhaust pipe diameter (inner diameter) : Φ5.0±0.1 mm
Process pipe diameter (inner diameter): Φ6.2±0.1 mm
Compressor noise : ≤40dB(A)
Vibration : 0.6m/s²。
Working volume:2.5cm³
Cooling Capacity:
RPM is 2000, cooling capacity is 45W , 38.7 Kcal/h ,153.5 btu/h,Efficiency COP is 1.25 w/w,electric current is 2.9/1.4，input Power is 36W
RPM is 2500, cooling capacity is 55W , 47.3 Kcal/h ,187.7 btu/h,Efficiency COP is 1.25 w/w,electric current is 3.5/1.7,input Power is 44W
RPM is 3000, cooling capacity is 64W , 55 Kcal/h ,218.4 btu/h,Efficiency COP is 1.25 w/w,electric current is 4.1/2.0, input Power is 51W
RPM is 3500, cooling capacity is 74W , 63.6 Kcal/h ,252.5 btu/h,Efficiency COP is 1.25 w/w,electric current is 4.9/2.4, input Power is 59W
Digital Thermostat Parameters:
Voltage range: DC 12-24V, limit 35V
Operating current: 0.1A
Door Lamp Function: Door lamp voltage follows input voltage
Temperature probe accuracy: ±1℃
Operating ambient temperature: -10℃～60℃, relative humidity 20%～90%
Package includes
Packing List:
1 x Compressor
1×Temperature controller
1 x Compressor
1×Temperature controller
Product Highlights
The controller automatically adapts to dual voltage, i.e. DC 12V and 24V power input systems. The maximum input voltage is 17V for DC 12V systems and 31.5V for 24V systems.
The operating temperature of the controller is not greater than 50°C; when the temperature of the controller case is too high, the compressor will be stopped and over-temperature protection will be generated.
Installation: Insert the three-phase output plug of the controller tightly into the terminal of the compressor, and tighten the screws after the controller is set into the mounting card of the compressor.
Temperature switch: The temperature switch is connected to the C and T terminals of the controller. If no resistor is connected in between, the compressor will run at 2000rpm when the temperature switch is closed.
External Fan: A 12V DC fan can be connected between the terminals (F+) and (F-) of the controller, the positive terminal of the fan is connected to the (F+) terminal of the controller and the negative terminal is connected to the (F-) terminal of the controller. The output between terminals (F+) and (F-) will always remain at 12V when the input voltage to the controller exceeds 12V. The fan must be a 12V DC fan regardless of whether the input voltage system is 12V or 24V.
The operating temperature of the controller is not greater than 50°C; when the temperature of the controller case is too high, the compressor will be stopped and over-temperature protection will be generated.
Installation: Insert the three-phase output plug of the controller tightly into the terminal of the compressor, and tighten the screws after the controller is set into the mounting card of the compressor.
Temperature switch: The temperature switch is connected to the C and T terminals of the controller. If no resistor is connected in between, the compressor will run at 2000rpm when the temperature switch is closed.
External Fan: A 12V DC fan can be connected between the terminals (F+) and (F-) of the controller, the positive terminal of the fan is connected to the (F+) terminal of the controller and the negative terminal is connected to the (F-) terminal of the controller. The output between terminals (F+) and (F-) will always remain at 12V when the input voltage to the controller exceeds 12V. The fan must be a 12V DC fan regardless of whether the input voltage system is 12V or 24V.
2. Items are generally shipped out within 3 days after your payment has been cleared.
NOTE：Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-7 working days to:USA
It may take a bit longer time, due to local dispatches, Customs checking, High Season period, eg. x'mas or other reasons. Your patience is always appreciated.
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.
Your comments about our products are welcomed. We hope to have the opportunity to establish business relationships with you. Our goal is "providing you both high quality products and the best prices".
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you , immediately before you give neutral or negative feedback, so that we can address your concerns.
Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 (Beijing China time)
1. We are in different time zones, during the working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and considerable to give us a little more time.
2, please with ebay message if we made a deal on ebay. E-mail is often filtered as spam.
3, Please wait for our reply to your email, we will do our best to help you solve the problem.