Material: SSH pickups.
DC resistance (approximate): 9.86K (neck pickup), 10.9K (middle pickup), 14.6K (bridge pickup).
Hole spacing: 50mm for both neck pickup (N) and middle pickup (M), 52mm for bridge pickup (B).
Applicable range: Fits most ST-type guitars.
Weight: 700g/set.
Package Contents:
1 x 3-ply guitar guard.
2 x single coil pickups.
1x Humbucking pickup.
1 x 5-way switch.
3 x 1V 2T potentiometers (copper shaft).
4 single-knife switches.
1 Enhancement switch.
1 x 400V/200V capacitor.
1 output jack.
11 screws.
Important note:
In addition to the original functions, four single-pole switches and one enhancement switch bring new functions:
When the 5-way switch is placed in the first position, the neck pickup operates. When the boost switch is pressed at this time, the neck and bridge pickups will operate simultaneously.
When the 5-way switch is placed in the second position, the neck and center pickups operate together, at which point the boost switch is pressed and the neck, center and bridge pickups will operate simultaneously.
Each pickup has a separate single-knife (push-pull) switch. With the single blade switch on, if the single blade does not sound good, it may be better to use the tone switch.
