STEG CAC.4 4-channel Class A high-level adapter with remote out

• Active signal processing, with Class A drive for uncompromising audio performance.

• Fully balanced input stage for improved noise rejection and slew rate.

• Dual power supplies for each channel pair.

• Output load designed to match the output impedance of any radio.

• Unbalanced line output to drive any type of amplifier.

• High quality, low tolerance passive components.

• Class A operational amplifiers designed for audio use.

• Ultra low harmonic distortion.

• Reverse power protection.

• Power on signal generation (remote).

• Status LED, Green LED operating status, 2 red LEDs to indicate peak output for each channel pair.

• Full Surface Mount Technology (SMT).

• Small size for quick/easy installation optimization.

• 4-channel power inputs via wiring.

• 4-channel Hi-input via wiring.

• 4-channel PRE signal outputs on solid RCA connectors.

• Supports high level signal outputs on DSP cables and DSP amplifiers.

• Professional CNC aluminum case.

• Standard 4-layer FR4 circuit board for extraordinary reliability and noise reduction.

• Optimized signal path to increase noise immunity.

• STOP-BUMP, circuit designed in GTTrading laboratories to eliminate all noise (bumps) during power-up.

• Supports high power (BTL) and low power (SE) radios.

• Ultra low quiescent current (less than 0.1mA at 14V4).

• Low operating current consumption (less than 20mA at 14V4).

• PRE output signal on RCA up to 5 Volts with 12V power supply.

• High Level output signal on 9 Volts wiring at 100ohm.

• Accepts input signals up to 20 Volts.

• The input stage can handle signals up to 100W with an equivalent power of 4ohm.