Model: Upgraded Loaded HSH Guitar Guard Set
Material: Alnico 5 pickups, imported copper wire
Pickup DC resistance (approx.):
Neck pickup: Alnico 5 humbucker, 7.5K ohms; hole spacing 50mm
Center pickup: Single-coil pickup, 9.8K ohms; hole spacing 52mm
Bridge pickup: Alnico 5 humbucker, 14K ohms; hole spacing 52mm
(K ohms values are for reference only and will vary with temperature)
Potentiometers: 3 CTS 500K potentiometers, 1V 2T
Switches: 4 single-cut switches; 1 boost switch
Capacitors: 2 orange capacitors
Output Jack: 1pc
Functions and features: 5-way switch for different styles of tone, perfect for upgrading any common guitar setups
Applicable range: Suitable for most ST-type guitars
Difficulty to use: simple, just solder the reserved wire to the guitar spring claw
Weight: 700g/set
Accessories: 11 screws
Important Tips:
In addition to the basic functions, four single-cut switches and an enhanced switch bring new functions as follows:
When the 5-way switch is placed in the first position, the neck pickup works. When the boost switch is pressed at this time, the neck pickup and bridge pickup will operate simultaneously.
When the 5-way switch is placed in the second position, the neck pickup and the center pickup operate together, at which point the Enhancement switch is pressed and the neck, center and bridge pickups will operate simultaneously.
Each pickup has a separate single-cut (push-pull) switch. With the single cut switch turned on, if the single cut does not sound good, it may be better to use the compensation switch.
