This easy to use machine Cylinder Filling Adaptor will enable you to fill your own CO2 from your larger bulk cylinder into smaller cylinders.

Hose length: 50cm with reinforced spring cover.

This Refill Adapter cannot be used with pink Quick Connect Cylinder

How it works:

In order for you to use it correctly, please follow our instructions:

1.Cool the machine Cylinder in the freezer for 1 hour.

2.Screw the CGA320/W21.8 connection to a commercial CO2 gas cylinder.

3.Disconnect the quick connector of the black adapter, and then tighten the black adapter to the machine cylinder( must turn the knob on the top of the black adapter to the highest position,the whole process does not need to turn the adapter knob down to open the cylinder,If the adjusting rod press down 6mm wide valve pin, this will close the valve and CO2 cannot enter)

4.Connect the quick connector

5. For most big cylinders: turn the big cylinder upside down or lie it down.（some host tank has not the dip/syphon tube inside.）

6.Carefully Open the valve of the large gas bottle（The valve on the machine Cylinder closes the flow if it is opened to much. This will happen if you open the big cylinder too much / too fast. The trick is to open the big cylinder very carefully. You will hear the air flow. So to fill it successfull）

7.After about 15-20 sec., The cylinder is completely filled

8.Close valve of the large gas bottle

9.Opening the bleed screw to drain residual gas

10.Unscrew the CO2 cartridge – done

Please note: 

The whole process does not need to turn the adapter knob down to open the machine cylinder.

If the big bottle is too big to be upside down, you can put it down to inflate.

1.If there is liquid CO2 inside the cylinder, please upside down your CO2 tank if you can not refill when the CO2 tank standing,because some of tank have not the dip tube (syphon tube)inside.

2.The cylinder should be empty.Pre Cooled cartridges will get quite full. 

3.need to open the tank valve very slowly when you filling the protection valve(6mm wide pin) of machine bottle.

4.Our adapter don't work RPV valve (residual pressure valve),please find picture as follow,but some of RPV valve can be removed by hex wrench,please check before ording. If your big tank has a RPV valve,you can choose "RPV pushing adapter"  in option to make order.

Package Includes:

1x Adapter Hose Kit Set

Note:
Please allow minor errors due to manual measurement.
Item color displayed in photos may be showing slightly different since monitors are not calibrated same.

• We only accept PayPal and Credit Card.
• Payoneer is the only online payment method we accept. Please make sure you have a valid/confirmed Payoneer account prior bidding. And please make sure that your Payoneer registed address is the same with your eBay registed address.  

• It usually takes about 10-30 working days to arrive for economy shipping which not including tracking number; 7-15 working days for standard shipping which including tracking number. Transit time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance.
• Note: It may takes more than 30 working days to other countries such as Mexico,Brazil,Chile,Peru, because they is far away from China.
• PS: We also offer faster shipping service (3-5 days to deliver), such as DHL,EMS, but buyers need to pay for the extra shipping cost. Please contact us if you need it.
• Customs Declaration:
• Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.                    
• Please check with your country's customs office to determine what these additional costs will be prior to bidding.

• If you are dissatisfied with our item or service, then please follow the good eBay practice to contact us by eBay message before leaving any feedback. We are committed to resolve all issues in a friendly and satisfactory manner.
• We always reply to eBay messages within 1-2 business days. If you do not get a response from us, then please check your eBay message.
• Only unused, undamaged and original condition item can be qualified for a return. 

• We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions, please feel free to contact us instead of leaving negative feedback. We will reply your email within 24 working hours.