Features:
With multiple protections, input overvoltage conservation, reverse connection conservation, poor of the test clip detection prompt, safer to use.
Quickly and accurately detect the status and the car from breaking down midway.
It can be directly connected to the of the car for testing, no need to remove the , more convenient.
It can detect and display capacity SOC and status SOH, which are displayed as a percentage.
Through the low frequency signal injection test, there is no need to connect a large load discharge test, and it will not cause damage to the .
The voltage status and discharge capacity can be detected, and the display can be switched by moving /down buttons.
Wide application, it is suitable for car -acid starter , including regular flooded, EFB, , winding , , etc.
Specifications:
Material: ABS
Applicable Voltage: /24V
Voltage Measure : 8-30V
Test : 3AH-200AH
Test : SOH, SOC, CCA Value, , etc.
Test standards: CCA, SAE,DIN, IEC, EN, CA
Working : -40-60℃
Item Size: 150 * 90 * 35mm/ 5.9 * 3.5 * 1.4in
Item Weight: 325g/ 11.5oz
Package Size: 165 * 110 * 55mm/ 6.5 * 4.3 * 2.2in
Package Weight: 400g/ 14.1oz
Note:
Due to the different and effect, the actual color of the item might be slightly different from the color shown on the pictures.
Packing List:
1 * Car Tester
1 * Manual
With multiple protections, input overvoltage conservation, reverse connection conservation, poor of the test clip detection prompt, safer to use.
Quickly and accurately detect the status and the car from breaking down midway.
It can be directly connected to the of the car for testing, no need to remove the , more convenient.
It can detect and display capacity SOC and status SOH, which are displayed as a percentage.
Through the low frequency signal injection test, there is no need to connect a large load discharge test, and it will not cause damage to the .
The voltage status and discharge capacity can be detected, and the display can be switched by moving /down buttons.
Wide application, it is suitable for car -acid starter , including regular flooded, EFB, , winding , , etc.
Specifications:
Material: ABS
Applicable Voltage: /24V
Voltage Measure : 8-30V
Test : 3AH-200AH
Test : SOH, SOC, CCA Value, , etc.
Test standards: CCA, SAE,DIN, IEC, EN, CA
Working : -40-60℃
Item Size: 150 * 90 * 35mm/ 5.9 * 3.5 * 1.4in
Item Weight: 325g/ 11.5oz
Package Size: 165 * 110 * 55mm/ 6.5 * 4.3 * 2.2in
Package Weight: 400g/ 14.1oz
Note:
Due to the different and effect, the actual color of the item might be slightly different from the color shown on the pictures.
Packing List:
1 * Car Tester
1 * Manual