Bipolar 6mm & 4mm conductive rubber loops / TENS / estim / electrode / Black
Double Monopole Insulated 6mm Conductive Rubber Loops / TENS / estim / electrastim / et312 / 2B. Condition is New. Dispatched with Royal Mail 2nd Class Large Letter Free P&P. Colour: Black Plug Size: 2mm This is a 3D printed Double Insulated Monopole Conductive Rubber Electrode. The insulator allows you to direct current through both the Dorsal and Perineal nerves when worn as the lower loop with all tackle through it in conjuction with a second electrode placed higher on the shaft. This stimulates both nerve groups for a better result. Each Insulator will be printed in BLACK PLA. This electrode comes with one loop of 10"/25cm and a loop of 8"/20cm of British 6mm highly conductive rubber tubing that takes 2mm plugs. It will be dispatched un-painted but with 6mm conductive rubber tubing already fitted. Your TENS cables 2mm plug plugs in at either end, you can attach up to four plugs to this electrode from different channels if you are using a Tri-phase set-up to make it the base connector. You can either use this as both electrodes on a single channel or spice things up with two other electrodes to target other areas. I recommend that you paint it to seal the surfaces with a plastic paint such as Krylon Fusion For Plastic. Private listing. I will not leave feedback unless you ask me to for your privacy. Note: Images shown are renderings unless stated, the printed product will show some layer lines and require a light sanding.Jet Set Willy is our first foray into 3D-printed stainless steel electrodes. Yes, you read that correctly; they are 3D printed.
Fusing powdered 316L stainless steel with a laser requires extremely expensive machines. This is way beyond our in-house capabilities, so we have enlisted the help of one of the biggest manufacturers of 3D-printed metal products.
Why 3D-printed stainless steel? Using an additive manufacturing process means less waste, and unique shapes and designs that were impossible to make in any other way suddenly become possible.
So, after months of design work and considerable expense, including investing in our own post-processing equipment (a media blasting cabinet, compressor, and abrasive media), we can now reveal Jet Set Willy.
This is a monopole glans electrode made from 316L stainless steel with unique design features.
- It is a monopole electrode, so you will need to use another electrode in conjunction with it.
- It fully encapsulates the glans, providing lots of surface area contact.
- It has a hole in the front for ejaculate and pre-cum to escape.
- It features four different methods of connection: crocodile clips, 3,5mm snap studs, 2mm pins, and 4mm pins. We use small pieces of high-quality conductive rubber for the 2mm and 4mm plug sockets.
- The connectors are also double-sided, so you can easily attach more than one channel, making tri-phase play less complicated.
- The textured surface helps keep conductive lube/gel in place.
- It is made from 316L stainless steel, so cleaning and even sterilisation between users is possible.
Plenty of sizing options are available, with four sizes and more planned. Sizing is critical, so we have also designed and sell a nylon sizing kit that you can buy to ensure you get the right size. These sizing kits come with a discount code that will give you £9.50 off one of these electrodes if you then go on to purchase one.
The sizes pertain to the internal measurement from the rear face to the front of the glans, and this electrode is available in five sizes:
- 35mm/1.4"
- 40mm/1.6"
- 45mm/1.8"
- 49mm/1.92"
- 53mm/2.1".
Oh, and because we like to go above and beyond for our customers, we also supply these in an ABS case.