eBay

LAUNCH CRE Elite 2.0 Scan Tool FOR GM: One - Click Update Via Wifi (For More Features, Newer Vehicles, Better Performance)

Do you love your car? Why pay a technician 200 dollars to connect a scanner to the OBD2 port when you can do the same troubleshooting by yourself?

There are few things your car will require of you to maintain its longevity - changing your oil, replacing air filters and other general service tasks.
Many people wonder though, whether those task mentioned is a simple DIY process or has to be done by an expert technician.
We say: you can definitely handle the replacement on your own via our professional Launch CRE Elite 2.0 diagnostic scanner tool!
Except for auto repair shop, here is another choice for you to learn about your car condition deeply.
One CRE Elite professional scan tool may equal you register or maintain once in the shop, but definitely value than twice and more, can save maintenance Time and Money for you.

Why Is The Launch Creader Elite 2.0 Diagnostic Scanner Tool Is So Powerful And Reliable?

Same Functions as LAUNCH X431 and OEM Tools, including ECU Coding, ADAS Calibration, IMMO Service, Key Programming, etc. but Launch Creader Elite Scanner is More valuable, If you have FOR GM vehicle, The Launch CRE Elite 2.0 Scanner Must Be The First Choice For You.
Launch Creader Elite 2.0 automatic scan tool is based on Andoird 8.1, 2GB running storage, 16G ram(Support up to 64GB expansion). It can speed up data transfer and diagnostics time.
Launch Creader Elite diagnostic scanner supports 31+ Special Functions FOR GM Vehicle, lifetime free update.
Launch Creader Elite scanner have more advanced functions such as Refresh Hidden Functions, Offline Coding, ADAS Calibration, Bidirectional Control, Key programming, etc.
Launch Creader Elite 2.0 Scan Tool released in 2026. New technology is applied.
Perfect gift for technician, Suitable for small auto repair shop and Personal Auto Repair, Give you More Faster & Smoother experience.

Full Systems Diagnoses In FOR GM Vehicle Systems on the ECUs

MAX SYSTEM. MAX POWERFUL.

LAUNCH Creader Elite 2.0 automotive scanner can scan 100+ modules like ECM(engine), TCM(Transmission), ABS, SRS(Airbag), Brake System, BCM(Body Control Module), EPS(Eletronic Power Steering), HVAC(Heat, Ventilation and Air Conditioning), TPMS(Tire Pressure Monitor System Reset), Radio, EPB and so on to perform OE level diagnostics to read and clear codes, view live data stream, perform active tests, and retrieve ECU information, allows you to get a faster and more accurate test result on all electronic systems.

LAUNCH Creader Elite 2.0 Scanner provides more powerful features than scanner tool.

[Health Report Share & Print ] ALL MODULE Diagnosis Health Report Share & Print – ALL MODULE Diagnosis automatic diagnostic scanning tool enables diagnostic technicians to generate diagnostic reports before and after car diagnosis and repair service, so that the diagnostic reports can be printed out or sent to customers through the Internet and compared or shared with customers.
[Plug and Play] Plug the diagnostic cable into the vehicle's DLC port, the screen of Launch Creader Elite 2.0 FOR GM will automatically light up and turn on. It is very convenient.
[Diagnostic History] This car diagnostic scanner records the every details of diagnostic session, provides a quick access to the tested vehicles, and enables users to choose to view the test report or resume from the last operation, without the necessity of starting from scratch, you can record/ review/ playback live data anytime.
[Diagnostic Report] Once the diagnostic process is successfully finished, a diagnostic report will be automatically generated and sent to your mailbox. You can download it, and then print it to share it with others.
[Diagnostic Feedback] LAUNCH TECH’s engineers will help you troubleshoot problems. Customized exclusive beta version software for your car can be obtained here.
[Screen Snapshot] Snapshot graphing shows you any failures or glitches at a glance, you can share it to ask for help.
[4 in 1 Live Data Stream] There are 3 ways to view the data, you can choose the one that suits you best. Value–it is the default mode that displays the parameters in texts and shows them in list format. Graph–displays the parameters in waveform graphs. Combine–this is the most used in graph merge status for data comparison. In this case, different items are marked in different colors. (Combine up to 4 options)You can also record the data stream and playback the data.
[Supported 11 Languages] English, French, Spanish, German, Russian, Italian, Portuguese, Japanese, Korean, Chinese Traditional, Polski. If you feel more comfortable with your native language, you can switch back and forth as necessary without encountering any sort of language barrier.
[DCT Lookup] DTC Lookup is used to search for definitions of DTCs stored in the DTC libraryand for code breaker information, and Code Breaker is used to provide descriptions of DTCs and helpful tips to deal with DTCs.It is useful for technicians to find the root cause of trouble code faster, saving diagnosis and repair time.
[Single Serie Diagnostic Tool] Newest Launch Scan Tool suitable FOR GM series car like for Buick for Chevrolet for Cadillac FOR GMC OBDII cars from 1996-2026, 1994-1996 OBDI cars need to purchase extra connecting line.

Launch Creader Elite 2.0 Diagnostic Tool Supports More Than 31+ Special Reset Functions

CONTINUOUSLY GROWING WITH UPDATES, which usually only be available from car Dealer Level Scanners or much more Expensive Professional Tools

EPB Reset (Electronic Parking Brake Reset) : After replacing the brake pads, you need to reset the position of the brake pads before installing the new brake pads to close the warning light.
Oil Lamp Reset : Close the oil service light, reset service mileage & service interval after replacing the engine oil, and the next maintenance calculation cycle is entered.
SAS Reset (Steering Angle Calibration Reset) : Learn to correct the angle and solve the problem of the steering angle of the steering wheel.
BMS Reset (Battery Register / Battery Maintenance) : Use the power management system, the battery needs to be re-matched after the battery is replaced, so that the car computer can recognize the new battery.
ABS Brake Bleeding : When changing a new brake fluid, there is a high possibility that air will enter the brake fluid pipeline. In the traditional way, one person steps on the brake and another person changes the operating fluid. This function can perform the brake operation, and only one person is required to change the brake fluid.
SUS Reset (Suspension) : This function needs to be performed to level the body height sensor in the air suspension system when the body height sensor and the control module or the car is leveled incorrectly.
TPMS Reset (Tire Pressure Monitor System Reset) : When replacing TPMS sensors or the signal from the sensor is lost it can quickly look up the tire sensor from the vehicle’s ECU, reset tire pressure and turn off the tire pressure MIL.
GEAR Reset (Gear Learning) : The vehicle has a crankshaft position sensor. This sensor collects the 58-tooth signal of the flywheel to determine the top dead center ignition time of a cylinder (reference signal). If this sensor is replaced, the reference will be lost, and gear signal learning is necessary.
Injector Reset (Injector Coding) : The engine injector has a code. After replacement, you need to write a new code into the computer so that the car computer can correctly identify the injector.
AFS Reset (Adaptive Frontlighting System) : It can detects the ambient light and then decides whether to turn on the headlights automatically. It can also adjust the headlights in time by monitoring the speed of the vehicle and the posture of the body.

11.Intelligent Cruise Control, 12.Engine Power Balance Moonitoring, 13.Motor Angle Calibration, 14. Head Light Fitting, 15.Seat Matching/Calibration, 16.Door and Window Initialization Study/Calibration, 17.Sunroof Initialization, 18.Air Suspension Matching, 19.Gearbox Matching, 20.Injector Calibration, 21.Multimedia Video Reset, 22.Cluster Reset, 23.Tire Change Reset, 24.Key Programming, 25.Coolant Bleed, 26.NOx Sensor Reset, 27.Stop/Start Reset, 28.Transport Mode, 29.Adblue Reset, 30.A/F, 31.A/C Relearn, more and more function will be kept growing and optimized constantly.

Q : Why do I only see 16 or 21 service functions on my tablet, when its advertised 31 service functions.

A : It will do 31 or more. Of course it's completely need no spends.You might want to go through the fast menu of "Reset" section to find them but once you've hooked it up you'll find everything. For example, to connect 2014 FOR GM FOR Acadia, the way to use TCM‘s special functions should be to go to System Selection> Transmission Control Module (TCM) > Special Functions, then you will be able to see the list of special functions supported by this system, There are more than 31 types of special functions for all systems combined.Please do not purchase any special features in the Mall .

ECU Coding

LAUNCH CRE GM SCAN TOOL

Allow you to code your FOR GM yourself, customize it according to your wishes and unlock hidden features.

ECU Coding: Every automobile actuator has a record code in ECU, which is the basis for automobile computer to mobilize their work. Same as other LAUNCH X431 High-end OE-level scan tool , LAUNCH CRE 2.0 FOR GM Scan Tool has the capability of ECU coding to change preprogrammed options in the software, helping you customize your car faster as needed.

After you change the bad actuators or certain parts, you need to use this function to make a new code and recognize the new actuators.
Unlock hidden features,deactivate annoying features. Optimally code your car by changing some settings to fit your needs. Such as:

1. Flash Hidden Functions 2. Teach-in Program 3. Component Adaptation 4. Adjust LED Brightness 5. Changing the color of interior lights 6. Start & Stop button coding 7. Remote window control unlocking 8. Activating the auto side mirrors folding function 9. switching on/off the auto hold 10. Air conditioning setting memory 11. ABS Module Coding 12. Set Custom ADS Settings, etc.

Provide excellent solutions for issues of drivability, power loss, fuel efficiency, etc. to improve the car’s performance.

NOTICE: Not all ECU Coding options are available for all models or model years.

Single-Brand Serie Car Diagnostic Scan Tool, All Car Brand OBD Scanner Tool

Oe-Level Intelligent Diagnostic Scanner

The Lanuch Creader Elite Scan Tool can diagnostic Full OBD 10 modes on global OBDI/OBDII/EOBD

Reads, clears codes and turns off MILs;
Requests and records live sensor data, displays freeze frame data;
Does active test on specific systems and components;
1994-1996 OBD1 vehicles need to purchase extra connecting cable.

LAUNCH Creader Elite 2.0 diagnostic scanner comes with Lifttime Free Updates which are updated frequently to improve the scanner’s capability and coverage. It’s a scanner growing stronger and smarter every day.