[Easy to Operate]: This watch pressing tool applies pressure by tightening the top handle, which means you can fully control the pressure used; It has a compact size and is easy to carry, ideal for closing your case after resizing or repair work
[Efficient Pressing]: This bezel closer can be used to efficiently press the waterproof watch case; The easy-to-use design helps to press the watch crystal and without risking your hand and the watch itself
[Watch Variable ]: There are 20 different sizes of watch molds (18/20 21/23 24/26 28/30 31/32 33/34 36/38 40/42 43/45 48/50), you can easily move aluminum alloy molds to install suitable molds
[Sturdy Structure]: Made of high-quality aluminum alloy and steel, this watch back case closer is stable, hard and , with anti-rust, anti- and anti-oxidation characteristics
[Applicable to]: The watch back cover closer is necessary for watch repairers, watch shops, etc. The face-down configuration means that the repairer can see the case closed; pressing the bezel shell is reliable and suitable for most watches
Features:
- This watch bezel closer can be used for pressing waterproof watch cases efficiently. Easy-to-use design that helps to press watch crystals and dies without risking any clamps on your hands and on the watch itself.
- This watch press tool applies pressure by screwing top handle, this means you can total control how much pressure you use, you can use just enough pressure to fit crystal or case back.
- There are 20 assorted dies for watches of all sizes (18/20 21/23 24/26 28/30 31/32 33/34 36/38 40/42 43/45 48/50).
- Made of high-quality aluminum alloy and steel, this watch back case closer is stable, hard, and . It features to rust, , and oxidation.
Specification:
Material: Stainless Steel + Aluminium
Color: Shown As Pictures
Press Tool Size: Approx. 12 * 10 * 20cm / 4.72 * 3.94 * 7.87inch
Round Size: 18/20 21/23 24/26 28/30 31/32 33/34 36/38 40/42 43/45 48/50
2 Round Dies: 16/16 20/25mm
Square Size: 20 25 30 35 40 45mm
Size: 37 45mm
Weight: 1620g
Type: Repair Tools & Kits
Note:
The measurement error is about 2 mm, thank you for your understanding.
There is an error in the size of manual measurement, thank you for your understanding.
Instructions:
1. Choose a die which is bigger than the watch crystal and install it at screw-socket of under pliers.
2. Choose other die which is smaller than the rear cover and install it at screw-socket of up pliers.
3. Put a watch crystal adown at the under die and put the rear cover at a suitable position.
4. Lightly press down.
5. Putting a cloth under the watch crystal will protect the watch crystal.