
There is a P-word fault code in the instrument when the hand brake button is not illuminated.
A simple maintenance method to deal with the failure of electronic hand brake lights.
Maintenance strategy is applicable to: generally, it is due to bad aging of motor or damage of electronic hand brake box gears (such as gear cracking or wear or motor)
It is not recommended that the owner take risks by himself (requiring professional maintenance personnel). If there is short circuit of hand brake computer board or motor,
the owner will not be responsible for the loss caused by short circuit. Excuse me!
When the car has this fault light. Put the car up! Open a box on the rear chassis directly, then replace the motor or hand brake box gear. After replacement,
don't forget to punch black glue on the cover and tighten the screw from the new stain to eliminate the trouble lights.
Typical Symptoms:
Handbrake button don't light, there is Error Code "P'' on Instrument Dash.
DIY isn't suggested, it need professionals, we are not responsible for risks of brake module computer short circuit or motor circuit.
When this error light appears on your car, get the roof up, open the box on the rear chassis of the car directly then change the motor, after you change it, close the cover and don't forget to put black glue then stick and tighten it with new screws. The fault light is eliminated.
Package Includes:
1pc x electronic Parking Brake Actuator Handbrake Module Motor
Condition: 100% new
Note:
The Parking Brake Actuator Handbrake Module motor is easy to damage, if you want to change, need to change the entire module, so we developed this motor, so that you can spend very few money and don't have to change the other car parts.
Feature:
1) Material: iron and copper
2) According to the original factory specifications
3) Perfect match for the original car.
4) Easy installation.
5) Stable characteristics, high reliability.


