How to Clean Foggy or Oxidized Headlights
Cleaning Your Headlights with Toothpaste
What You’ll Need
- Automotive-grade masking tape
- Automotive detail wax
- Car wash soap and water
- Clean cloths
- Spray bottle
- Toothpaste with baking soda
- UV headlight sealant
How to Clean Headlights with Toothpaste??
1. Clean with soap and water.
Clean the headlights and the area around them with car wash soap and water. Dry everything with a clean cloth.
2. Apply automotive-grade masking tape.
Carefully apply tape to the area around the headlights to protect your car’s paint. To avoid damaging the finish, it’s important to use masking tape that’s designed for cars. You can find it at your local auto parts store.
3. Spray headlights with soapy water.
Use a spray bottle to apply a solution of soapy water to one of the headlights.
4. Add toothpaste to a cloth and scrub gently.
Place a small amount of toothpaste onto a clean cloth. Using light to medium pressure, move your hand in circular motions to scrub the headlight with the toothpaste. Make sure to keep the headlight wet with soapy water while you do this.
5. Rinse toothpaste off.
Use clean water to remove any remaining toothpaste residue from the headlight.
6. Do the same thing on the other headlight.
Repeat steps three through five on the other headlight, then dry both headlights with a clean cloth.
7. Apply a coat of wax.
Take your automotive detail wax and apply a coat to each of the headlights. Wipe them clean.
8. Use UV headlight sealant.
Apply UV headlight sealant to each of the headlights. Follow the instructions that come with the product for proper application.
9. Cure sealant in sunlight or with UV light.
Leave the headlights out in sunlight or use a UV light to cure the sealant. Allow to cure for the specified duration, as outlined in the product information.
Cleaning Your Headlights with a Headlight Restoration Kit
What You’ll Need
- Automotive-grade masking tape
- Car wash soap and water
- Clean cloths
- Headlight restoration kit
- Paper towels
- Spray bottle
How to Clean Headlights with a Restoration Kit??
1. Clean with soap and water.
Similar to the headlight cleaning toothpaste method, you’re going to start by cleaning the headlights and the area around them with car wash soap and water. Dry everything with a clean cloth.
2. Apply automotive-grade masking tape.
Carefully apply tape to the area around the headlights to protect your car’s paint. To avoid damaging the finish, it’s important to use masking tape that’s designed for cars. You can find it at your local auto parts store.
3. Spray headlights with soapy water.
Use a spray bottle to apply a solution of soapy water to one of the headlights.
4. Find the coarsest piece of sandpaper in the kit.
Keep in mind: the lower the number, the more abrasive the sandpaper. For example, if your kit contains the grits 1000, 2000, and 3000, the piece of 1000 sandpaper is the most abrasive.
5. Dip the coarsest piece of sandpaper into soapy water.
You’ll need to make sure it remains wet the entire time you’re sanding; otherwise, you’ll leave deep scratches in the lens.
6. Begin sanding one of the headlights.
Make sure you sand in the same direction the entire time using straight horizontal strokes—and again, make sure the sandpaper stays wet. Once you’re done, clean the lens with a soft cloth.
7. Repeat steps three through six using each of the less abrasive pieces of sandpaper.
Use each piece of sandpaper one at a time. Once again, you’ll want to follow the product instructions closely for this step.
8. Do the same thing on the other headlight.
Repeat steps three through seven on the other headlight.
9. Remove any residue and wipe dry.
After you’ve finished sanding both headlights, clean any remaining residue, then dry using a cloth.
10. Apply polish and wax.
Squeeze a small amount of polish onto a clean cloth. Using light pressure, move your hand in circular motions to apply the polish to each of the headlights. Wipe the headlights clean, then follow up with a coat of wax and wipe the headlight off when you’re done.
11. Apply UV headlight sealant.
Once again, apply UV headlight sealant. Make sure to follow the instructions that come with the product for proper application.
12. Cure sealant in sunlight or with UV light.
After applying sealant, place the headlights out in sunlight or use a UV light to cure. Allow to cure for the specified duration, as outlined in the product information.
