Product description:
This combo set including:
3.4L Black gas frame w/ petcock
YD100 engine kits
Key words:
1, Black 3.4L Aluminum Bike Frame With Built-in Gas Tank 3.4L;
Note: If buyers' bike rear wheel is with quick release,we suggest buyers do not buy the gas frame unless buyers are professional
Please clean the black painting on threads of bottom bracket before you assemble the crankset.
For 2-Stroke & 4-Stroke Engines.
Requirement on headset size:1 1/8"; bottom bracket 1.732" /44mm diameter;
Gas Tank Cap included;
Diameter of downtube:42mm
Required for seat post:27.2mm
Required for seat post clamp:31.8mm
2, Key Product Features:
Gasoline motor: YD100-100CC(Real Displacement is 79cc/80CC)
Engine Type: Single cylinder, air-cooled,2-stroke
Mixing Ratio of Fuel(90#) and Engine Oil: 16: 1 for New sets, 20: 1 after Running 500Km
Power: 2.0KW
Bore and Stroke: 50mm x 40mm
Cylinder inner diameter: 50mm
Piston outside diameter: 50mm
Maximum speed:45-50km/h
8mm front and rear mount studs
NEW Red CDI IGNITION
Cylinder Head and Cylinder Two In One, better design for cooling, higher power with hill driving easily.
1. For new motor run-in period is 300km at least.
2. During run-in period, it is prohibited to accelerate throttle handle too fast, you can grip the handle slowly (step by step), or the motor will be locked up.
3. Mixing ratio of fuel and engine oil: 16:1 for new sets, 20:1 after running 500km.
YD100-100CC Differences with Standard 80cc engine kits:
Two in one cylinder,
Crank,
Piston kits,
CDI,
Carburetor
44T wide crank assembly kit:
Note:
1.If you buy it , please measure the size;
2.Compatible with 9/16 inch pedals; Compatible with BB 44mm; Will not be compatible with Micargi Beach Cruiser's stock pedals;
3. If your bike is 2" cup, pls use a bottom bracket converter (need you to buy it from your local shop or our store);
Key Product Features： |
If your bike is 2" cup of bottom bracket, pls use a bottom bracket converter
(we do not offer this converter, need you to buy it from your local shop), compatible with BB 44mm. For our 3.4L gas frame.
Be used on 26" cruiser style frame;
Compatible with 9/16 inch pedals. Sprocket Fit for 410 chain
Crank Arm Length: 165mm;
The Length of the pedal crank shaft is about 266mm;
Chrome Wide Crank w/ 44T Sprocket
This part allows you to convert a 1 piece crank into a 3 piece crank.
Wide cranks are required for 2 stroke and 4-stroke or pull start bicycle engine kits
We truly care much more your purchasing experience,We are 100% dedicated to your complete satisfaction.
if you have any questions, please freely to ask and I will do my best to get back to you promptly!
Products usually shipped on the second business day and you will receive message of tracking id.
NTNMOTORCYCLE is registered officially in year 2012 and started business in year 2008, we can provide engine kits, high performance spare parts of engine, motorized bicycle and spare parts of bike.
hope you can have a great time when shopping with us.